water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

EXW Singapore

Collect or forward from our office

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 3122 of 4992

Two-piece straight ball valve with brass/bronze construction and press x press connections. Features a lever handle for manual on/off flow control. Suitable for use in industrial piping systems handling water, oil, or gas.

APOLLO

APOLLO 77WLF10701A Bronze Ball Valve, 1-1/2 in, Press x Press, Lever Handle

BrandAPOLLO

Sign inAvailable

This brass straight pipe fitting connects 1 1/4 in and 1/2 in threaded pipes in low-pressure potable water systems. Rated Class 125 with a maximum operating pressure of 200 psi, it is suitable for residential and commercial plumbing applications requiring a corrosion-resistant joint.

OEM

OEM APPROVED VENDOR Brass Straight Pipe Fitting

BrandOEM

Sign inAvailable

Cast-iron sewage ejector pump with ductile iron impeller, horizontal discharge, and 50 ft maximum head. Designed for handling wastewater and sewage in commercial and industrial applications. Motor rated at 3 hp, 460V AC, three phase, 60 Hz. Switch not included.

FRANKLIN ELECTRIC

FRANKLIN ELECTRIC Non-Clog Sewage Ejector Pump

BrandFRANKLIN ELECTRIC

Sign inAvailable

Straight-pattern brass ball valve with female iron pipe (FIP) connections on both ends. Equipped with a lever handle for manual on/off flow control. Rated for a maximum cold working pressure of 600 psi. Suitable for use in plumbing, HVAC, and industrial water systems.

NIBCO

NIBCO GB1A Brass Ball Valve, 1/2 in, FIP x FIP, Lever Handle, 600 psi CWP

BrandNIBCO

Sign inAvailable

GASTEC

GASTEC 1A Carbon Monoxide Gas Detection Tube, 5-50 ppm, 10-Pack

BrandGASTEC

Sign inAvailable

Watertight pin and sleeve receptacle rated for 277/480V AC, three-phase, 20 A, with 4 poles and 5 wires. Suitable for industrial environments requiring a weather-resistant power connection, such as manufacturing plants, outdoor construction sites, and heavy equipment applications.

HUBBELL

HUBBELL HBL520R7W Watertight Pin and Sleeve Receptacle

BrandHUBBELL

Sign inAvailable

This 2-way, 2-position normally closed solenoid valve is designed for on/off control of fluids in industrial piping systems. It features a 1 in pipe size, operates on 120V AC, and includes a coil enclosure with a junction box. The NBR seal makes it suitable for water, air, and light oil applications.

REDHAT

REDHAT 2-Way Normally Closed Solenoid Valve

BrandREDHAT

Sign inAvailable

Brass manual balancing valve with press connections for hydronic heating and cooling systems. Flow range 8.56 to 19.81 gpm, minimum flow 8.56 gpm, accuracy ±3%. Used to regulate and balance water flow across zones.

VIEGA PROPRESS

VIEGA PROPRESS Manual Balancing Valve, Press, 8.56–19.81 gpm, Brass, MPN 82125

BrandVIEGA PROPRESS

Sign inAvailable

Dayton

Dayton Turbine Centrifugal Pump, 1/2 hp, 115/230V AC, 120 psi Shut-Off, ODP

BrandDayton

Sign inAvailable

This metal 4-way valve tool removes valve cores, re-taps threads, and reams the inside of valves. It includes four valve cores and measures 1 1/2 in overall length by 17 mm overall width. Suitable for tire valve maintenance on vehicles and equipment.

SLIME

SLIME 4-Way Valve Tool

BrandSLIME

Sign inAvailable

← Prev 1…3120 3121 3122 3123 3124…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.

Guides & Resources

KOHLER GM39129 Marine Generator Exhaust Manifold: The Complete OEM Buyer's Guide for International Sourcing