3G-OTH-559202 Type II Safety Can for Flammables, 5 Gallon: International Buyer's Guide
Table of Contentsexpand_more
The 3G-OTH-559202 Type II safety can for use with flammables, 5 gallon is a 5 US gal (≈18.9 L) steel container built to store and dispense flammable liquids with a self-closing lid, flame arrestor and pressure-relief mechanism. Buyers should confirm the exact material, approvals and fill/dispensing configuration against their site's requirements before ordering.
What is a Type II safety can?
A Type II safety can is a flammable-liquid container fitted with a self-closing lid and a separate dispensing spout, both protected by flash arrestors, plus a pressure-relief valve. It is designed for controlled pouring and filling rather than simple storage, which distinguishes it from a Type I can.
Type II cans are the standard choice where operators dispense solvents, fuels or thinners repeatedly during a shift. Brands such as BRADY are widely referenced in industrial labelling and safety programs that accompany these containers, while METRO shelving is often used to organise the storage area around them.
Type I vs Type II: which suits your application?
Type I cans have a single opening used for both filling and pouring. Type II cans add a separate fill port and a flexible dispensing spout, reducing spillage and vapour release during repeated dispensing.
- Type I: occasional filling, short transfer distances, lower dispensing frequency.
- Type II: frequent dispensing, longer pours, solvent and thinner transfer in workshops.
- 5 gallon (≈18.9 L): the common mid-size for maintenance bays and plant rooms.
Spec table: 3G-OTH-559202 Type II safety can, 5 gallon
| Attribute | Value / requirement |
|---|---|
| Product reference | 3G-OTH-559202 |
| Type | Type II safety can |
| Nominal capacity | 5 US gal (≈18.9 L) |
| Intended media | Flammable liquids |
| Closure | Self-closing lid |
| Safety features | Flash arrestor; pressure-relief valve |
| Dispensing | Separate fill port and dispensing spout |
| Typical construction | Steel body (confirm coating and material with supplier) |
| Commercial terms | EXW Singapore |
Values above reflect the standard Type II 5 gallon configuration; confirm exact material, coating and approvals on the quotation before purchase.
How does a Type II safety can work?
Liquid is poured into the fill port and dispensed through the spout. Both openings carry flash arrestors that stop a flame from travelling into the can, and the self-closing lid seals the contents when the handle is released. A pressure-relief valve vents excess internal pressure.
This combination reduces ignition risk during transfer and limits vapour escape between uses. It is why Type II cans are preferred where solvents are dispensed repeatedly rather than simply stored.
Selection criteria for international buyers
- Capacity and fill volume: a 5 US gal (≈18.9 L) can should not be filled to the brim; leave headspace for expansion.
- Material and coating: confirm steel grade and internal/external coating compatibility with the specific flammable liquid.
- Approvals and labelling: check that the can and accompanying labels meet your site's safety program; BRADY labelling is commonly used alongside.
- Dispensing configuration: confirm spout length and fill-port arrangement suit your bench or drum layout.
- Storage environment: pair with dry-use shelving such as METRO cantilever wire shelves where appropriate.
- Commercial terms: goods are offered EXW Singapore; confirm collection and onward logistics with your freight provider.
Product comparison: related catalogue items
The 3G-OTH-559202 safety can is supplied to order; the table below shows related catalogue items often specified alongside it for workshop and maintenance programs.
| Model | Type | Key spec | Typical use |
|---|---|---|---|
| AIRMAN 12V Tire Repair Air Compressor Kit | 12V tire inflator | 0 psi min; 2 ft hose | Light-duty roadside inflation |
| AIRMAN 12V Tire Repair Air Compressor Kit with Ball Adapter | 12V tire inflator | 0–55 psi; 2 ft hose | Roadside tire repair |
| AIRMAN 12V Tire Repair Air Compressor Kit, 110 psi | 12V tire inflator | 0–110 psi; 2 ft hose | Job-site tire repair |
| SLIME 12V Tire Repair Kit, 1 1/2 ft Hose | 12V tire inflator | 9 in overall length | Emergency roadside assistance |
| SLIME 12V Tire Repair Kit, 2 ft Hose | 12V tire inflator | 10 1/4 in overall length | Roadside or fleet maintenance |
| SLIME 12V Tire Repair Kit, 11 in Length | 12V tire inflator | 11 in overall length | Roadside or workshop tire maintenance |
| METRO Steel Cantilever Wire Shelf, 48 in x 12 in | Shelving | 150 lb capacity; chrome finish | Dry storage of supplies |
| METRO Steel Cantilever Wire Shelf, 42 in | Shelving | 150 lb capacity; chrome finish | Dry storage in commercial areas |
Step up to the higher-pressure AIRMAN kit where job-site tires require more than 55 psi. For workshop storage around the safety can, the METRO shelves provide a dry-use, NSF-approved option.
Why source from 3G Electric?
3G Electric interprets your requirement and supplies the right industrial equipment, parts and supplies across 14 industrial departments — and we supply far more than is listed. With 35+ years of experience and specialist depth in combustion, pumps and controls, we quote parts beyond the catalogue on request. Goods are offered EXW Singapore, with collection from our Singapore office; items are shipped to us from our overseas warehouse where applicable.
Frequently asked questions
What is a 3G-OTH-559202 Type II safety can used for? It stores and dispenses flammable liquids such as solvents, thinners and fuels. The Type II design adds a separate fill port and dispensing spout with flash arrestors, plus a self-closing lid and pressure-relief valve, reducing ignition and spill risk during repeated transfer.
How much can a 5 gallon safety can hold? Nominal capacity is 5 US gal (≈18.9 L). Practical fill is lower to allow headspace for thermal expansion; follow your site's flammable-liquid storage rules and the manufacturer's fill guidance.
Type I vs Type II safety can — which should I buy? Choose Type II where operators dispense frequently and need a separate fill port and spout. Type I suits occasional filling and pouring from a single opening. For workshop solvent transfer, Type II is generally preferred.
Can I order the 3G-OTH-559202 can for delivery in my country? Goods are offered EXW Singapore, meaning collection from our Singapore office. International buyers arrange onward freight and customs with their own provider; 3G Electric does not handle shipping, logistics or customs.
What should I check for international use? Confirm material and coating compatibility with your flammable liquid, verify local storage and labelling requirements, and check that any electrical accessories (e.g. 12V inflators) match your 12 VDC supply. Note that 50 Hz and 60 Hz supply differences apply to mains-powered equipment, not to the manual safety can.
Key takeaways
- The 3G-OTH-559202 is a 5 US gal (≈18.9 L) Type II safety can for flammable liquids, with self-closing lid, flash arrestor and pressure-relief valve.
- Type II adds a separate fill port and dispensing spout versus Type I.
- Confirm material, coating and approvals against your site's requirements before ordering.
- Goods are offered EXW Singapore; buyers arrange onward freight.
- 3G Electric supplies across 14 industrial departments and quotes parts beyond the catalogue.
Contact 3G Electric for a quote on the 3G-OTH-559202 Type II safety can or related workshop items. Installation and on-site or remote technical help are not offered.
