WIKA E-10 Pressure Transmitter, 0-5 psi, 20mA, 1/2 in NPT
The WIKA E-10 Pressure Transmitter (0 psi to 5 psi, 20mA output) is a stainless steel pressure transmitter with a 1/2 in NPT male conduit with free ends and a 1/2 in male NPT process connection. It features ±0.5%…
SKU 3G-OTH-176472
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The WIKA E-10 Pressure Transmitter (0 psi to 5 psi, 20mA output) is a stainless steel pressure transmitter with a 1/2 in NPT male conduit with free ends and a 1/2 in male NPT process connection. It features ±0.5% accuracy, an IP67 and NEMA 4X rating, overpressure of 45 psi, burst pressure of 2x range, and requires 30V DC power. No NIST-traceable calibration certificate is included.
Frequently Asked Questions
What is the WIKA E-10 pressure transmitter used for?
The WIKA E-10 pressure transmitter is used for industrial pressure measurement in applications requiring a 0 psi to 5 psi range with a 20mA output. It is suitable for harsh environments due to its stainless steel housing, IP67 and NEMA 4X ratings, making it ideal for process control, hydraulic systems, and general industrial monitoring.
What are the specifications of the WIKA E-10 pressure transmitter (MPN 50361988)?
The WIKA E-10 pressure transmitter (MPN 50361988) has a 0 psi to 5 psi range, 20mA output, ±0.5% accuracy, IP67 and NEMA 4X ratings, overpressure of 45 psi, burst pressure of 2x range, and requires 30V DC power. It features a 1/2 in NPT male conduit with free ends and a 1/2 in male NPT process connection, with a stainless steel housing.
Where to buy the WIKA E-10 pressure transmitter worldwide?
You can source the WIKA E-10 pressure transmitter worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we provide reliable sourcing for this WIKA model and other industrial components.
How to install the WIKA E-10 pressure transmitter?
To install the WIKA E-10 pressure transmitter, ensure the 1/2 in male NPT process connection is properly sealed with thread sealant and tightened to the mating port. Connect the 1/2 in NPT male conduit with free ends to your wiring, supplying 30V DC power. Avoid over-torquing and verify the 20mA output signal after installation for accurate readings.
Used in
Common applications for WIKAWIKA Products
3G Electric supplies WIKA pressure transmitters with cable & wire leads. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- FLOWLINE Noncontact ultrasonic level sensor with 2 in NPT connection and 2 3/8 in antenna diameter. Measures liquid level up to 18 ft with ±0.2% accuracy. Outputs 4 to 20 mA signal on 24V DC power. Viton seal suitable for aggressive fluids. Used for continuous level measurement in tanks, sumps, and open channels
- FLOWLINE Noncontact ultrasonic level sensor transmitter with 2 in NPT connection, 3 3/8 in antenna diameter, and 393.6 in range. Operates on 24V DC with 4 to 20mA output and accuracy of +/-0.2% of Range. No display. Suitable for measuring liquid level in tanks or vessels without contacting the media, commonly used in water, wastewater, chemical, and industrial process applications
- FLOWLINE Noncontact ultrasonic level sensor transmitter for continuous level measurement of chemicals, oil, wastewater, and water. Operates on 24V DC with 4 to 20mA output and accuracy of +/-0.2% of range. No display. 1 in NPT connection
- FLOWLINE Noncontact ultrasonic liquid level sensor transmitter with 1 in NPT mount and 117.6 in range. Operates on 24V DC with 4 to 20mA output and accuracy of +/-0.2% of range. Antenna diameter is 1 3/8 in. Suitable for continuous level measurement in tanks, sumps, and open channels