WEGC-Face with Rigid Base 3-Phase General Purpose AC Motors

WEG 00718ET3E213TC-W22 C-Face with Rigid Base 3-Phase General Purpose AC Motor

The WEG General Purpose Motor is a C-Face with Rigid Base 3-Phase AC motor, model 00718ET3E213TC-W22 (SKU 3G-OTH-55510). It features a TEFC enclosure, delivers 7 1/2 hp at 1,765 RPM (60 Hz), and operates on 230/460V…

SKU 3G-OTH-55510

Also listed as: 00718ET3E213TCW22 · 00718ET3E213TC W22

Brand

WEG

Item

00718ET3E213TC-W22 C-Face with Rigid Base 3-Phase General Purpose AC Motor

Part Number

00718ET3E213TC-W22

Local availability & support

Delivery: Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
Payment: Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material: Not classified as hazardous
California Prop 65 warning: No warning recorded
Licence required: No licence required
Safety Data Sheet: Not available
Special shipping: Required — additional freight charges may applyThis item requires special shipping, additional charges may apply.

Technical Specifications

WEG

Manufacturer Part Number

00718ET3E213TC-W22 

Type

Totally Enclosed Fan Cooled, 7 1/2 hp, 1,765 RPM 

Phase

Three Phase The type of power source available. Motors are either single-phase (1 PH) or three-phase (3 PH). 

UNSPSC

26101612

Weight

168 lb 

CC Number

CC029A

Frequency

60 Hz 

RPM Range

1,701-1,800 

Standards

CE; CSA; NOM; UL 

Frame Size

213TC 

Mfr. Model

00718ET3E213TC-W22 

Application

General Purpose 

Bearing Type

Ball 

Catalog Page

19

Frame Family

NEMA 210 

Motor Design

Three-Phase 

Product Type

General Purpose Motor 

Shaft Design

Keyed 

Shaft Length

3-3/8 in 

Mounting Type

Rigid Base; C-Face 

Usable @ 200V

Not Usable at 200V Usable @ 200V This describes a motor's ability to operate at a supplied voltage of 200V. Not all high-voltage motors are capable of 200V operation. 

Usable @ 208V

Usable at 208V Usable @ 208V The motor's ability to operate at a supplied voltage of 208V. Not all high-voltage motors are capable of 208V operation. 

Frame Material

Cast Iron 

Overall Length

19-1/2 in 

Shaft Diameter

1-3/8 in 

Inverter Rating

Inverter Rated Inverter Rating This describes a motor's ability to be speed-controlled by an inverter or variable frequency drive (VFD) 

Motor Enclosure

TEFC 

Sub Application

Air Compressor; Fan/Blower 

Insulation Class

F Insulation Class The maximum temperature the motor's insulation can withstand without degrading. 

Number of Speeds

1 Number of Speeds The number of operating speeds a motor offers. 

Country of Origin

Varies (subject to change) 

Length Less Shaft

16-1/8 in 

Mounting Position

All Angle 

NEMA Design Class

B

Nominal Efficiency

91.7 % Nominal Efficiency The average efficiency expectation from a standardized group of motors or a particular motor design. 

Motor Enclosure Type

Totally Enclosed Fan Cooled 

Motor Shaft Rotation

CW/CCW 

Nameplate RPM @ 50 Hz

975 RPM Nameplate RPM @ 50 Hz The motor's nominal operating speed under rated load, represented in RPM (revolutions per minute). 

Nameplate RPM @ 60 Hz

1,765 RPM Nameplate RPM @ 60 Hz The motor's nominal operating speed under rated load, represented in RPM (revolutions per minute). 

Full Load Amps @ 50 Hz

10.3; 10.5; 11.0 A Full Load Current @ 50 Hz The maximum amount of current that a motor is designed to draw when operating at full capacity. 

Full Load Amps @ 60 Hz

18.4/9.18 A Full Load Current @ 60 Hz The maximum amount of current that a motor is designed to draw when operating at full capacity. 

Manufacturers Warranty

3 yr 

Output Shaft (Dia x L)

1-3/8 in x 3-3/8 in 

Motor Thermal Protection

None 

Compliance & Restrictions

Environmentally Preferable Product 

Full Load Current @ 50 Hz

The maximum amount of current that a motor is designed to draw when operating at full capacity. 

Full Load Current @ 60 Hz

The maximum amount of current that a motor is designed to draw when operating at full capacity. 

Nameplate Voltage @ 50 Hz

190/380V AC Nameplate Voltage @ 50 Hz The electrical power that must be supplied to a motor to ensure it operates correctly. The available power supply must match the selected motor exactly. 

Nameplate Voltage @ 60 Hz

230/460V AC Nameplate Voltage @ 60 Hz The electrical power that must be supplied to a motor to ensure it operates correctly. The available power supply must match the selected motor exactly. 

Nameplate Horsepower @ 50 Hz

7-1/2 

Nameplate Horsepower @ 60 Hz

7-1/2 hp Nameplate Horsepower @ 60 Hz The motor's output power. It is normally listed as HP or Output Wattage on the motor's nameplate. 

Ambient Temperature - Maximum

40 °C Ambient Temperature - Maximum The highest environmental temperature a motor will operate in without losing performance or function. 

Nameplate Service Factor @ 50 Hz

1.25 

Nameplate Service Factor @ 60 Hz

1.25 

Technical Documents

(1)

Technical Document 1

PDF Document

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

WEG Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Frequently Asked Questions

What is the WEG General Purpose Motor 00718ET3E213TC-W22 used for?

This WEG C-Face with Rigid Base motor is used in industrial applications requiring reliable 3-phase AC power, such as pumps, fans, conveyors, and compressors. Its TEFC enclosure protects against dust and moisture, making it suitable for harsh environments.

What are the specifications of the WEG 00718ET3E213TC-W22 motor?

The WEG General Purpose Motor delivers 7 1/2 hp at 1,765 RPM (60 Hz) with a TEFC enclosure. It operates on 230/460V AC, drawing 18.4/9.18 A full load current. The model 00718ET3E213TC-W22 features a C-Face with Rigid Base mount for direct-coupled equipment.

Where to buy the WEG 00718ET3E213TC-W22 motor worldwide?

3G Electric supplies the WEG 00718ET3E213TC-W22 motor worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.

How to select the right WEG general purpose motor for an application?

Select a WEG motor by matching horsepower, RPM, voltage, and enclosure to your load. For the 00718ET3E213TC-W22, verify 7 1/2 hp, 1,765 RPM, 230/460V AC, and TEFC enclosure suit your environment. Ensure the C-Face with Rigid Base mount aligns with your equipment's shaft and mounting dimensions.

Used in

Common applications for WEG

Water treatment — WEG TEFC general purpose motors drive pumps and mixers in continuous-duty applications.

HVAC systems — WEG ODP motors power fans and blowers in air handling units.

Material handling — WEG C-face motors with rigid base couple directly to gearboxes on conveyors.

Oil and gas — WEG IEC metric motors used on skid-mounted equipment requiring metric mounting.

Food and beverage — WEG TEFC motors with washdown duty options for processing lines.

Industrial automation — WEG CFW series VFDs with CAB-RS-3M cable for remote keypad mounting.

Not sure this is the right part? Photo-identify it→

WEG Products

3G Electric supplies WEG c-face with rigid base 3-phase general purpose ac motors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all WEG products →Contact our engineers →