WEATHERHEAD 7705X10X10X10 Flareless Bite-Type Steel Compression Tee Fitting
The WEATHERHEAD Compression Tee Fitting is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, sized 5/8 in OD x 5/8 in OD x 5/8 in OD (MPN 7705X10X10X10). 3G Electric interprets demand and…
SKU 3G-OTH-470384
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The WEATHERHEAD Compression Tee Fitting is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, sized 5/8 in OD x 5/8 in OD x 5/8 in OD (MPN 7705X10X10X10). 3G Electric interprets demand and delivers this genuine industrial fitting across 14 departments—and far more—with specialist trust anchored in combustion, pumps and controls as an authorised distributor for brands including WEATHERHEAD, Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Frequently Asked Questions
What is a WEATHERHEAD Compression Tee Fitting used for?
This flareless bite-type steel compression tee fitting is used to branch hydraulic or pneumatic tubing lines in industrial fluid power systems. It creates a leak-tight joint without flaring, ideal for high-pressure applications in manufacturing, mobile equipment, and process plants.
What are the specifications of the WEATHERHEAD 7705X10X10X10?
The WEATHERHEAD 7705X10X10X10 is a 7000 Series Ermeto compression tee fitting. It is made of steel with three 5/8 in OD tube connections. This flareless bite-type design provides reliable sealing without flaring, suitable for demanding hydraulic and pneumatic circuits.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric supplies and delivers genuine WEATHERHEAD compression fittings worldwide. We handle full logistics and customs clearance for global orders. Contact our team to source the 7705X10X10X10 or other 7000 Series Ermeto fittings for your industrial application.
How to install a WEATHERHEAD flareless bite-type compression fitting?
Insert the tube fully into the fitting until it bottoms out. Tighten the nut by hand, then use a wrench to turn the nut the specified number of flats (typically 1 to 1.25 turns) to form the bite ring seal. Do not overtighten. Always follow the manufacturer's instructions for tube wall thickness and torque.
Used in
Common applications for WEATHERHEADWEATHERHEAD Products
3G Electric supplies WEATHERHEAD flareless bite-type steel compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
