We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
RFQ CartGet a QuoteSign inSign up
VEKTEK End of Arm Tooling: 2 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure - Three-Finger Self-Centering Parallel Grippers
VEKTEKThree-Finger Self-Centering Parallel Grippers

VEKTEK End of Arm Tooling: 2 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure

The VEKTEK VZP-50-C2 is a three-finger self-centering parallel gripper for end-of-arm tooling, with a 2 mm stroke length. It operates at 2 bar to 8 bar, with a maximum operating pressure of 8 bar and a minimum of 2…

SKU 3G-OTH-623098

Also listed as: VZP50C2 · VZP 50 C2

Brand
VEKTEK
Item
End of Arm Tooling: 2 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure
Category
Three-Finger Self-Centering Parallel Grippers
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Delivery
Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Technical Specifications

VEKTEK
Manufacturer Part Number
VZP-50-C2
Type
2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

VEKTEK Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The VEKTEK VZP-50-C2 is a three-finger self-centering parallel gripper for end-of-arm tooling, with a 2 mm stroke length. It operates at 2 bar to 8 bar, with a maximum operating pressure of 8 bar and a minimum of 2 bar, and carries an IP40 rating.

Frequently Asked Questions

What is the VEKTEK VZP-50-C2 three-finger gripper used for?

The VEKTEK VZP-50-C2 is a three-finger self-centering parallel gripper designed for end-of-arm tooling in industrial automation. It is commonly used for precise pick-and-place, assembly, and part handling in robotic cells, especially where a 2 mm stroke and IP40 protection are sufficient.

What are the specifications of the VEKTEK VZP-50-C2?

The VEKTEK VZP-50-C2 is a three-finger self-centering parallel gripper with a 2 mm stroke length. It operates at 2 bar to 8 bar, with a maximum operating pressure of 8 bar and a minimum of 2 bar. It carries an IP40 rating and is part of the VZP series.

Where to buy the VEKTEK VZP-50-C2 worldwide?

3G Electric supplies the VEKTEK VZP-50-C2 gripper to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this end-of-arm tooling component to your facility. Contact us for availability and lead time.

How to select a three-finger self-centering parallel gripper?

When selecting a three-finger self-centering parallel gripper like the VEKTEK VZP-50-C2, consider stroke length, operating pressure range (2 bar to 8 bar), IP rating (IP40), and the weight and geometry of the part to be gripped. Ensure the gripper's force and repeatability match your robotic application.

Used in

Common applications for VEKTEK
Machining centers — VEKTEK zero point system fixture plates for quick workpiece changeover
Robotic assembly — VEKTEK robot coupler PQ9020 for EOAT interfaces on ISO 31.5-4-M5 flanges
Workholding — VEKTEK swing clamp hydraulic cylinders for clamping parts during milling operations
Automated gripping — VEKTEK parallel gripper jaw blanks for custom jaw fabrication in VGP/VZP series
Fixture setup — VEKTEK zero point system pull studs for securing workpieces to subplates
Tooling change — VEKTEK quick-change jaw adapters for rapid gripper jaw replacement in VY series

VEKTEK Products

3G Electric supplies VEKTEK three-finger self-centering parallel grippers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

Cross-referenced by specification & description
End of Arm Tooling: 20 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-300-C2)
VEKTEK
End of Arm Tooling: 20 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-300-C2)
VIBCO Piston Vibrator: End Mount, 7,000 vpm, 400 lb to 1,000 lb, 2.32 in L x 2.32 in W x 10.51 in H (MPN 30-1-1/4)
VIBCO
VIBCO Piston Vibrator: End Mount, 7,000 vpm, 400 lb to 1,000 lb, 2.32 in L x 2.32 in W x 10.51 in H (MPN 30-1-1/4)
VIBCO Piston Vibrator: End Mount, 13,000 vpm, 100 lb to 200 lb, 1.61 in L x 1.61 in W x 5.51 in H (MPN 10-3/4)
VIBCO
VIBCO Piston Vibrator: End Mount, 13,000 vpm, 100 lb to 200 lb, 1.61 in L x 1.61 in W x 5.51 in H (MPN 10-3/4)
VIBCO Piston Vibrator: End Mount, 7,000 vpm, 400 lb to 1,000 lb, 2.32 in L x 2.32 in W x 9.25 in H (MPN 10-1-1/4)
VIBCO
VIBCO Piston Vibrator: End Mount, 7,000 vpm, 400 lb to 1,000 lb, 2.32 in L x 2.32 in W x 9.25 in H (MPN 10-1-1/4)
VIBCO Piston Vibrator: End Mount, 14,500 vpm, 0 lb to 100 lb, 1.5 in L x 1.5 in W x 5.51 in H, Steel (MPN 10-5/8)
VIBCO
VIBCO Piston Vibrator: End Mount, 14,500 vpm, 0 lb to 100 lb, 1.5 in L x 1.5 in W x 5.51 in H, Steel (MPN 10-5/8)
VIBCO Piston Vibrator: End Mount, 7,000 vpm, 400 lb to 1,000 lb, 2.25 in L x 2.25 in W x 9.25 in H (MPN 40-1-1/4)
VIBCO
VIBCO Piston Vibrator: End Mount, 7,000 vpm, 400 lb to 1,000 lb, 2.25 in L x 2.25 in W x 9.25 in H (MPN 40-1-1/4)

More from VEKTEK

View all VEKTEK parts →
End of Arm Tooling: 4 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-80-C2)
VEKTEK
End of Arm Tooling: 4 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-80-C2)
End of Arm Tooling: 8 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-160-C2)
VEKTEK
End of Arm Tooling: 8 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-160-C2)
End of Arm Tooling: 6 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-125-C2)
VEKTEK
End of Arm Tooling: 6 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-125-C2)
End of Arm Tooling: 3 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-64-C2)
VEKTEK
End of Arm Tooling: 3 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-64-C2)
End of Arm Tooling: 8 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-80-C1)
VEKTEK
End of Arm Tooling: 8 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-80-C1)
End of Arm Tooling: 14 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-200-C2)
VEKTEK
End of Arm Tooling: 14 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-200-C2)
End of Arm Tooling: 17 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-240-C2)
VEKTEK
End of Arm Tooling: 17 mm Stroke Lg, 2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure (MPN VZP-240-C2)
End of Arm Tooling: 3 mm Stroke Lg, 2.5 bar to 8 bar, 8 bar Max Op Pressure, 2.5 bar Min Op Pressure (MPN VZO-64-C2)
VEKTEK
End of Arm Tooling: 3 mm Stroke Lg, 2.5 bar to 8 bar, 8 bar Max Op Pressure, 2.5 bar Min Op Pressure (MPN VZO-64-C2)