USA INDUSTRIALS Plug: 3 in, NPT Threaded, Hex Drive Solid Plug, 316 Stainless Steel, 150 psi @ 72°F
The USA INDUSTRIALS 3 in Low-Pressure Threaded Pipe Fitting is a 316 Stainless Steel, NPT Threaded, Hex Drive Solid Plug rated for 150 psi @ 72°F, Class 150 (MPN ZUSA-PF-23434). It is supplied with thread sealant for…
SKU 3G-OTH-649445
Also listed as: ZUSAPF23434 · ZUSA PF 23434
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS 3 in Low-Pressure Threaded Pipe Fitting is a 316 Stainless Steel, NPT Threaded, Hex Drive Solid Plug rated for 150 psi @ 72°F, Class 150 (MPN ZUSA-PF-23434). It is supplied with thread sealant for reliable sealing in low-pressure industrial piping systems.
Frequently Asked Questions
What is a USA INDUSTRIALS 3 in NPT threaded hex drive solid plug used for?
This 316 stainless steel plug seals low-pressure industrial piping systems. It is used to close off pipe ends or ports in applications up to 150 psi @ 72°F, such as water, air, or chemical lines, where corrosion resistance and a reliable NPT threaded seal are required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23434 plug?
The plug is a 3 in NPT threaded, hex drive solid plug made of 316 stainless steel. It has a maximum operating pressure of 150 psi @ 72°F and is Class 150 rated. The manufacturer part number is ZUSA-PF-23434, and it comes with thread sealant applied.
Where to buy a USA INDUSTRIALS 3 in NPT threaded plug worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS 3 in NPT threaded hex drive solid plug (ZUSA-PF-23434) worldwide. We handle full logistics, customs clearance, and delivery to your facility, ensuring you get the correct 316 stainless steel fitting for your low-pressure piping application.
How to install a 3 in NPT threaded hex drive solid plug?
Clean the female NPT port threads. Apply additional thread sealant if needed, then hand-tighten the plug into the port. Use a hex wrench on the drive to final-tighten to the recommended torque for 3 in NPT fittings. Do not overtighten, as 316 stainless steel can gall. Test the joint at operating pressure.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
