USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 3/4 in nominal pipe size, 7 in length, threaded on both ends with Male NPT x Male NPT connections and PTFE thread sealant. It has…
SKU 3G-OTH-464468
Also listed as: ZUSAPF22467 · ZUSA PF 22467
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 3/4 in nominal pipe size, 7 in length, threaded on both ends with Male NPT x Male NPT connections and PTFE thread sealant. It has a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS 3/4 in Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male threaded fittings in plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel resists corrosion in water and gas lines. Rated for 125 psi @ 72°F, it suits industrial piping where a short, threaded connector is needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22467 pipe nipple?
This pipe nipple has a 3/4 in nominal pipe size, 7 in length, Schedule 40 wall thickness, and galvanized steel construction. It features Male NPT x Male NPT connections with PTFE thread sealant applied. Maximum operating pressure is 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples for worldwide delivery?
3G Electric supplies USA INDUSTRIALS pipe nipples and handles logistics, customs clearance, and delivery to worldwide destinations. As a global industrial sourcing partner, we provide genuine parts like the ZUSA-PF-22467 with full export support.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads for a leak-tight seal. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final torque. Avoid overtightening to prevent thread damage.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
