USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 2 1/2 in nominal pipe size and 36 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied…
SKU 3G-OTH-464391
Also listed as: ZUSAPF22438 · ZUSA PF 22438
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 2 1/2 in nominal pipe size and 36 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied, rated for a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects two male NPT fittings in industrial plumbing, HVAC, and compressed air systems. Its galvanized steel construction resists corrosion, and the PTFE thread sealant ensures a leak-free joint at pressures up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22438 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22438 is a Schedule 40, galvanized steel, welded pipe nipple with a 2 1/2 in nominal pipe size and 36 in length. It has Male NPT x Male NPT connections, PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine parts like the ZUSA-PF-22438 to your site, regardless of location.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug fit without over-tightening, which can crack fittings. Test at 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
