USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 2-inch nominal pipe size, 72-inch length, and Male NPT x Male NPT connections threaded on both ends. It features PTFE thread…
SKU 3G-OTH-464402
Also listed as: ZUSAPF22430 · ZUSA PF 22430
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 2-inch nominal pipe size, 72-inch length, and Male NPT x Male NPT connections threaded on both ends. It features PTFE thread sealant and a maximum operating pressure of 125 psi at 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS 2 in Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT fittings in industrial piping systems for water, air, or low-pressure steam. Its 72-inch length and galvanized steel construction suit structural supports, handrails, or extended runs in plant maintenance, HVAC, and material handling applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22430 pipe nipple?
This pipe nipple has a 2-inch nominal pipe size, 72-inch length, Schedule 40 wall thickness, and galvanized steel material. It features Male NPT x Male NPT connections threaded on both ends, PTFE thread sealant, and a maximum operating pressure of 125 psi at 72°F.
Where to buy a USA INDUSTRIALS 2 in x 72 in galvanized pipe nipple worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-22430 pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a USA INDUSTRIALS Schedule 40 threaded pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid over-torquing to prevent thread damage. Always depressurize the system before installation.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
