USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/8 in nominal pipe size and 1 1/2 in length. It features male NPT threads on both ends with pre-applied PTFE thread…
SKU 3G-OTH-464529
Also listed as: ZUSAPF22380 · ZUSA PF 22380
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/8 in nominal pipe size and 1 1/2 in length. It features male NPT threads on both ends with pre-applied PTFE thread sealant, rated for a maximum operating pressure of 125 psi at 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/8 in pipe nipple connects two male NPT threaded fittings in low-pressure galvanized steel piping systems. It is commonly used in air, water, and gas lines where corrosion resistance and a leak-free seal are required, with a maximum operating pressure of 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22380 pipe nipple?
This pipe nipple has a 1/8 in nominal pipe size, 1 1/2 in length, Schedule 40 wall thickness, and is made of galvanized steel with a welded construction. It features male NPT threads on both ends with pre-applied PTFE thread sealant, rated for 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this Schedule 40 galvanized steel nipple (MPN ZUSA-PF-22380) and thousands of other genuine industrial parts.
How to install a Schedule 40 galvanized pipe nipple with PTFE sealant?
Hand-tighten the nipple into the female NPT port, then use a wrench for an additional 1-2 turns. The pre-applied PTFE sealant eliminates the need for tape or dope. Do not overtighten, as galvanized steel can crack. Maximum torque should not exceed the 125 psi @ 72°F rating.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
