USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple (SKU 3G-OTH-464485) is a Schedule 40, galvanized steel pipe nipple threaded on both ends with PTFE thread sealant. It features a 1/2 in nominal pipe size, 8 in length, and Male NPT x…
SKU 3G-OTH-464485
Also listed as: ZUSAPF22341 · ZUSA PF 22341
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple (SKU 3G-OTH-464485) is a Schedule 40, galvanized steel pipe nipple threaded on both ends with PTFE thread sealant. It features a 1/2 in nominal pipe size, 8 in length, and Male NPT x Male NPT connections, rated for a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT fittings in plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel resists corrosion in indoor and outdoor applications. Rated for 125 psi @ 72°F, it suits water, gas, and air lines where a durable, threaded joint is required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22341 pipe nipple?
This pipe nipple has a 1/2 in nominal pipe size, 8 in length, Schedule 40 wall thickness, and galvanized steel construction. It features Male NPT x Male NPT connections with PTFE thread sealant applied. Maximum operating pressure is 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-22341.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the ZUSA-PF-22341 or other Schedule 40 galvanized nipples.
How to install a threaded galvanized pipe nipple?
Apply PTFE tape or pipe dope to the male threads, then hand-tighten the nipple into the female fitting. Use a wrench for final tightening—avoid overtightening to prevent thread damage. Ensure the joint is aligned before full torque. For this nipple, PTFE sealant is pre-applied, so additional sealant may not be needed.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
