USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, Male NPT x Male NPT, 12 in Lg, Schedule 40
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with PTFE thread sealant, featuring a 2-inch nominal pipe size, 12-inch length, and Male NPT x Male NPT connections. It is welded and rated…
SKU 3G-OTH-483646
Also listed as: ZUSAPF22230 · ZUSA PF 22230
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with PTFE thread sealant, featuring a 2-inch nominal pipe size, 12-inch length, and Male NPT x Male NPT connections. It is welded and rated for a maximum operating pressure of 125 psi @ 72°F (MPN ZUSA-PF-22230).
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 pipe nipple with PTFE used for?
This USA INDUSTRIALS pipe nipple connects two male NPT threaded fittings in low-pressure piping systems. The PTFE thread sealant provides a reliable seal for water, air, and non-corrosive fluid lines up to 125 psi @ 72°F. It is commonly used in industrial plumbing, compressed air, and process piping applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22230 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22230 is a 2 in nominal pipe size, 12 in long, Schedule 40 welded pipe nipple with Male NPT x Male NPT connections. It includes PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F. The brand is USA INDUSTRIALS.
Where to buy USA INDUSTRIALS pipe nipples in worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22230 or other sizes. We source genuine industrial equipment across 14 departments.
How to install a Schedule 40 pipe nipple with PTFE sealant?
Clean both male threads and apply additional PTFE tape or paste if needed, though the nipple comes pre-coated. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Do not overtighten. Test the joint at operating pressure up to 125 psi @ 72°F to verify the seal.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
