USA INDUSTRIALS Pipe Nipple: Brass, 1 1/4 in Nominal Pipe Size, 4 in Overall Lg, Threaded on Both Ends
This USA INDUSTRIALS Schedule 40 Brass Pipe Nipple (MPN ZUSA-PF-21879) is threaded on both ends with Male NPT x Male NPT connections, a 1 1/4 in nominal pipe size, and a 4 in overall length. It features PTFE thread…
SKU 3G-OTH-649862
Also listed as: ZUSAPF21879 · ZUSA PF 21879
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
This USA INDUSTRIALS Schedule 40 Brass Pipe Nipple (MPN ZUSA-PF-21879) is threaded on both ends with Male NPT x Male NPT connections, a 1 1/4 in nominal pipe size, and a 4 in overall length. It features PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 796 psi @ 300 °F.
Frequently Asked Questions
What is a Schedule 40 brass pipe nipple used for?
A Schedule 40 brass pipe nipple connects two male NPT fittings in industrial piping systems for water, air, or steam lines. Its brass construction resists corrosion, and the PTFE thread sealant ensures a leak-tight joint. 3G Electric supplies this USA INDUSTRIALS nipple for maintenance and new installations across 14 industrial departments.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21879 pipe nipple?
This USA INDUSTRIALS pipe nipple has a 1 1/4 in nominal pipe size, 4 in overall length, and Male NPT x Male NPT connections. It is rated for a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 796 psi @ 300 °F. The PTFE thread sealant is pre-applied for convenience.
Where to buy a 1 1/4 in brass pipe nipple worldwide?
3G Electric supplies the USA INDUSTRIALS 1 1/4 in brass pipe nipple (ZUSA-PF-21879) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this Schedule 40 nipple with PTFE sealant.
How to install a threaded brass pipe nipple?
Clean both male NPT threads, apply additional PTFE tape or pipe dope if needed, and hand-tighten the nipple into the fitting. Use a wrench for final tightening—avoid over-torquing to prevent cracking. For steam service, verify pressure ratings (796 psi @ 300 °F) and use proper thread sealant. 3G Electric can advise on selection.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
