USA INDUSTRIALS Schedule 40 Brass Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass pipe nipple threaded on both ends with Male NPT x Male NPT connections, featuring a 1 1/2 in nominal pipe size and 10 in overall length. It includes PTFE thread…
SKU 3G-OTH-649840
Also listed as: ZUSAPF21875 · ZUSA PF 21875
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass pipe nipple threaded on both ends with Male NPT x Male NPT connections, featuring a 1 1/2 in nominal pipe size and 10 in overall length. It includes PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 731 psi @ 300 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 brass pipe nipple used for?
This brass pipe nipple connects two male NPT threaded fittings in industrial plumbing, steam, or compressed air systems. Its Schedule 40 wall thickness and PTFE sealant suit moderate-pressure fluid and steam lines up to 125 psi @ 72°F or 731 psi @ 300°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21875 pipe nipple?
The ZUSA-PF-21875 is a 1 1/2 in nominal pipe size, 10 in overall length, Schedule 40 brass nipple with Male NPT x Male NPT threads. It includes PTFE thread sealant and is rated for 125 psi @ 72°F operating pressure and 731 psi @ 300°F steam pressure.
Where to buy USA INDUSTRIALS brass pipe nipples worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-21875 brass pipe nipple worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your facility, ensuring you get the correct Schedule 40 nipple with PTFE sealant.
How to install a threaded brass pipe nipple with PTFE sealant?
Apply the factory-supplied PTFE thread sealant evenly to the male NPT threads. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex ends to tighten 1–2 additional turns. Avoid over-tightening to prevent stress cracking in brass.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.