USA INDUSTRIALS Pipe Nipple: Aluminum, 2 in Nominal Pipe Size, 36 in Overall Lg, Threaded on Both Ends
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 2-inch nominal pipe size and 36-inch overall length. It features Male NPT x Male NPT connections and a maximum…
SKU 3G-OTH-650849
Also listed as: ZUSAPF21735 · ZUSA PF 21735
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 2-inch nominal pipe size and 36-inch overall length. It features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi at 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple is used to connect two male NPT threaded fittings in low-pressure fluid or air systems. Its 36-inch length bridges gaps in piping runs, and aluminum resists corrosion in non-potable water or pneumatic applications up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21735 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-21735 is a 2-inch nominal pipe size, Schedule 40 aluminum nipple with a 36-inch overall length. It has Male NPT x Male NPT threaded connections on both ends and a maximum operating pressure of 125 psi at 72°F.
Where to buy a USA INDUSTRIALS aluminum pipe nipple worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-21735 aluminum pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a threaded aluminum pipe nipple?
Apply a compatible thread sealant or PTFE tape to the Male NPT threads. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid over-torquing to prevent thread damage. Always verify pressure rating compatibility with your system.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
