USA INDUSTRIALS Pipe Nipple: Aluminum, 1/4 in Nominal Pipe Size, 22 in Overall Lg, Threaded on Both Ends
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple, threaded on both ends with seamless construction. It features a 1/4 in nominal pipe size, 22 in overall length, and Male NPT x Male NPT…
SKU 3G-OTH-650988
Also listed as: ZUSAPF21114 · ZUSA PF 21114
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple, threaded on both ends with seamless construction. It features a 1/4 in nominal pipe size, 22 in overall length, and Male NPT x Male NPT connections, with a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple is used to connect two male NPT threaded fittings in low-pressure fluid or air systems. Its seamless construction and 125 psi rating at 72°F make it suitable for industrial piping applications requiring corrosion resistance and a 22-inch reach.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-21114?
The USA INDUSTRIALS pipe nipple has a 1/4 in nominal pipe size, 22 in overall length, and male NPT x male NPT threaded connections. It is Schedule 40, seamless aluminum, with a maximum operating pressure of 125 psi at 72°F. The manufacturer part number is ZUSA-PF-21114.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-21114 worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple ZUSA-PF-21114 to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this Schedule 40 aluminum nipple with 1/4 in NPT threads. Contact us for availability and lead time.
How to install a threaded aluminum pipe nipple?
Apply thread sealant or PTFE tape to the male NPT threads of the USA INDUSTRIALS nipple. Hand-tighten into the female fitting, then use wrenches on the nipple's hex section for final torque—avoid over-tightening to prevent thread damage. Ensure operating pressure stays below 125 psi at 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
