TRITAN ER8 Retaining-Ring Cylindrical Insert Bearing, 1/2 in Bore, 1 27/32 in OD
The TRITAN ER-8 is an inch-system retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1/2 in bore, 1 27/32 in OD, and 0.626 in outer ring…
SKU 3G-OTH-98249
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-8 is an inch-system retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1/2 in bore, 1 27/32 in OD, and 0.626 in outer ring width, secured by set screws. This bearing is identified by the industry number ER-8 and manufacturer part number ER8.
Frequently Asked Questions
What is the TRITAN ER-8 insert bearing used for?
The TRITAN ER-8 is a retaining-ring cylindrical insert bearing used in industrial machinery that requires radial load support and shaft alignment. Its double-sealed closure and set-screw locking suit applications like conveyors, fans, and agricultural equipment where inch-system bearings are specified.
What are the specifications of the TRITAN ER-8 bearing?
The TRITAN ER-8 is an inch-system radial/deep groove ball bearing with a 1/2 in bore, 1 27/32 in OD, and 0.626 in outer ring width. It features double-sealed closure, set-screw locking, and is identified by industry number ER-8 and manufacturer part number ER8.
Where to buy the TRITAN ER-8 bearing worldwide?
3G Electric supplies the TRITAN ER-8 bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this inch-system retaining-ring insert bearing for your application.
How to install the TRITAN ER-8 insert bearing?
To install the TRITAN ER-8, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly against the shaft using a hex key. Ensure the retaining ring is seated in the housing groove. Follow standard bearing installation practices for proper fit and alignment.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.