TRITAN Insert Bearing: ER-26, 1 5/8 in Bore, 3 11/32 in OD, 1.094 in Outer Ring Wd
The TRITAN ER-26 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with an inch system of measurement. It features a 1 5/8 in bore, 3 11/32 in OD, and 1.094 in outer ring…
SKU 3G-OTH-99670
Also listed as: ER 26 · ER-26
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-26 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with an inch system of measurement. It features a 1 5/8 in bore, 3 11/32 in OD, and 1.094 in outer ring width, with double-sealed closure and set screws for secure mounting. This bearing is identified by the industry number ER-26 and manufacturer part number ER26.
Frequently Asked Questions
What is a TRITAN ER-26 insert bearing used for?
The TRITAN ER-26 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design handles moderate radial and axial loads, while set screws lock it onto shafts. Common applications include conveyors, fans, and agricultural machinery.
What are the specifications of the TRITAN ER-26 bearing?
The TRITAN ER-26 has a 1 5/8 in bore, 3 11/32 in OD, and 1.094 in outer ring width. It is a double-sealed radial/deep groove ball insert bearing with set screws for shaft mounting. The inch-system design uses industry number ER-26 and manufacturer part number ER26.
Where to buy TRITAN ER-26 bearings worldwide?
3G Electric supplies the TRITAN ER-26 bearing to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this retaining-ring cylindrical insert bearing.
How to install a TRITAN ER-26 set screw bearing?
To install the TRITAN ER-26, clean the shaft and bearing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's recommended torque using a hex key. Ensure the retaining ring is seated properly in its groove. Always follow generic bearing installation best practices.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
