TRITAN Insert Bearing: ER-25, 1 9/16 in Bore, 3 9/64 in OD, 1.094 in Outer Ring Wd
The TRITAN ER-25 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 9/16 in bore, 3 9/64 in OD, and 1.094 in outer ring width…
SKU 3G-OTH-99580
Also listed as: ER 25 · ER-25
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-25 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 9/16 in bore, 3 9/64 in OD, and 1.094 in outer ring width, secured by set screws. This inch-system bearing is identified by industry number ER-25 and manufacturer part number ER25.
Frequently Asked Questions
What is the TRITAN ER-25 insert bearing used for?
The TRITAN ER-25 is a retaining-ring cylindrical insert bearing used in industrial machinery that requires radial load support and shaft alignment. Its double-sealed closure and set-screw locking make it suitable for conveyors, agricultural equipment, and material handling systems where contamination resistance and secure mounting are needed.
What are the specifications of the TRITAN ER-25 bearing?
The TRITAN ER-25 is an inch-system radial/deep groove ball insert bearing with a 1 9/16 in bore, 3 9/64 in OD, and 1.094 in outer ring width. It features double-sealed closure, set-screw locking, and is identified by industry number ER-25 and manufacturer part number ER25.
Where to buy the TRITAN ER-25 bearing worldwide?
3G Electric supplies the TRITAN ER-25 insert bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact our team to source this bearing for your application.
How to install the TRITAN ER-25 insert bearing?
To install the TRITAN ER-25, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to secure the inner ring. Ensure the retaining ring is properly seated in the housing groove. Always follow manufacturer guidelines for torque and alignment.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
