TRITAN Insert Bearing: ER-23, 1 7/16 in Bore, 2 53/64 in OD, 0.937 in Outer Ring Wd
The TRITAN ER-23 is an inch-system retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 7/16 in bore, a 2 53/64 in OD, and a 0.937 in…
SKU 3G-OTH-99386
Also listed as: ER 23 · ER-23
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-23 is an inch-system retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 7/16 in bore, a 2 53/64 in OD, and a 0.937 in outer ring width, secured by set screws. This bearing is identified by the manufacturer part number ER23 and the bearing industry number ER-23.
Frequently Asked Questions
What is the TRITAN ER-23 insert bearing used for?
The TRITAN ER-23 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design and double-sealed closure suit applications requiring reliable shaft support under moderate loads, such as conveyors, fans, and agricultural machinery.
What are the specifications of the TRITAN ER-23 bearing?
The TRITAN ER-23 is an inch-system bearing with a 1 7/16 in bore, 2 53/64 in OD, and 0.937 in outer ring width. It is a radial/deep groove ball type with double-sealed closure and set-screw locking. The manufacturer part number is ER23, and the bearing industry number is ER-23.
Where to buy the TRITAN ER-23 bearing worldwide?
3G Electric supplies the TRITAN ER-23 bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this TRITAN ER23 insert bearing.
How to install the TRITAN ER-23 set-screw bearing?
To install the TRITAN ER-23, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's recommended torque using a hex key. Ensure the retaining ring is properly seated in the housing groove. Always follow generic bearing installation best practices.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
