TRITAN Insert Bearing: ER-20, 1 1/4 in Bore, 2 53/64 in OD, 0.937 in Outer Ring Wd
The TRITAN ER-20 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. This inch-system component features a 1 1/4 in bore, 2 53/64 in OD, and 0.937…
SKU 3G-OTH-99088
Also listed as: ER 20 · ER-20
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-20 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. This inch-system component features a 1 1/4 in bore, 2 53/64 in OD, and 0.937 in outer ring width, secured by set screws. It is identified by bearing industry number ER-20 and manufacturer part number ER20.
Frequently Asked Questions
What is the TRITAN ER-20 insert bearing used for?
The TRITAN ER-20 is a retaining-ring cylindrical insert bearing used in industrial machinery such as conveyors, fans, and agricultural equipment. Its radial/deep groove ball design handles moderate radial and axial loads, while double-sealed closure protects against contaminants in harsh environments.
What are the specifications of the TRITAN ER-20 bearing?
The TRITAN ER-20 is an inch-system insert bearing with a 1 1/4 in bore, 2 53/64 in OD, and 0.937 in outer ring width. It is a radial/deep groove ball type with double-sealed closure, secured by set screws. The bearing industry number is ER-20 and manufacturer part number is ER20.
Where to buy the TRITAN ER-20 bearing worldwide?
3G Electric supplies the TRITAN ER-20 insert bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this inch-system bearing to any international destination.
How to install the TRITAN ER-20 insert bearing?
To install the TRITAN ER-20, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly to secure it. Ensure the retaining ring is properly seated in the housing groove. Use proper alignment tools to avoid damaging the double-sealed closure.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
