TRITAN ER19 Retaining-Ring Cylindrical Insert Bearing
The TRITAN ER-19 is an inch-system retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 3/16 in bore, 2 7/16 in OD, and 0.874 in outer…
SKU 3G-OTH-98969
Also listed as: ER 19 · ER-19
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-19 is an inch-system retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 3/16 in bore, 2 7/16 in OD, and 0.874 in outer ring width, secured by set screws. This bearing is identified by the industry number ER-19 and manufacturer part number ER19.
Frequently Asked Questions
What is the TRITAN ER-19 insert bearing used for?
The TRITAN ER-19 is a retaining-ring cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its double-sealed radial/deep groove ball design handles moderate radial and axial loads, while set screws secure it to shafts for reliable operation in dusty or wet environments.
What are the specifications of the TRITAN ER-19 bearing?
The TRITAN ER-19 is an inch-system radial/deep groove ball insert bearing with a 1 3/16 in bore, 2 7/16 in OD, and 0.874 in outer ring width. It features double-sealed closure, set-screw locking, and is identified by industry number ER-19 and manufacturer part number ER19.
Where to buy TRITAN ER-19 bearings worldwide?
3G Electric supplies the TRITAN ER-19 bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this inch-system retaining-ring cylindrical insert bearing for your application.
How to install the TRITAN ER-19 insert bearing?
To install the TRITAN ER-19, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly using a hex key to secure the bearing. Ensure the retaining ring is properly seated in the housing groove. Lubricate per manufacturer guidelines before operation.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.