TIMKEN Flange Mount Bearing: Radial Ball, 1 1/2 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/2 in cylindrical bore, a cast iron housing that is not split, and set screw locking. It is lubricated with NLGI 2 Lithium Complex…
SKU 3G-OTH-106381
Also listed as: YCJTM112SGT · YCJTM 1 1 2 SGT · YCJTM-1-1-2-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/2 in cylindrical bore, a cast iron housing that is not split, and set screw locking. It is lubricated with NLGI 2 Lithium Complex Grease and uses a 1/2 in mounting bolt. The inch-system unit has a 7 1/16 in length and is identified by manufacturer part number YCJTM 1-1/2 SGT.
Frequently Asked Questions
What is the TIMKEN Flange Mount Bearing used for?
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing used in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw locking provide reliable shaft support in moderate-load applications where inch-system dimensions are required.
What are the specifications of the TIMKEN Flange Mount Bearing YCJTM 1-1/2 SGT?
This bearing has a 1 1/2 in cylindrical bore, a cast iron housing that is not split, and set screw locking. It is lubricated with NLGI 2 Lithium Complex Grease, uses a 1/2 in mounting bolt, and has a 7 1/16 in length. The system of measurement is inch, and the manufacturer part number is YCJTM 1-1/2 SGT.
Where to buy TIMKEN Flange Mount Bearings worldwide?
You can source TIMKEN Flange Mount Bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the YCJTM 1-1/2 SGT model.
How to install a TIMKEN Flange Mount Bearing with set screws?
To install, align the bearing unit on the mounting surface and tighten bolts through the flange holes using the specified 1/2 in bolt size. Secure the shaft by tightening the set screws evenly against the shaft flat. Apply moderate torque per manufacturer guidelines to avoid housing distortion.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
