TIMKEN YCJT 1-3/8 SGT General Purpose Flange-Mount Ball Bearing
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent lubricant…
SKU 3G-OTH-109162
Also listed as: YCJT138SGT · YCJT 1 3 8 SGT · YCJT-1-3-8-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent lubricant, and has a 1/2 in mounting bolt size. This inch-system radial ball bearing (MPN YCJT 1-3/8 SGT) is made from 52100 steel and measures 6 1/8 in in length.
Frequently Asked Questions
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN 2 Bolt Flange Bearing is a general purpose radial ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw mounting allow secure shaft attachment in moderate-load applications.
What are the specifications of the TIMKEN YCJT 1-3/8 SGT flange bearing?
This TIMKEN flange bearing has a 1 3/8 in cylindrical bore, cast iron housing, set screw shaft locking, and a 1/2 in mounting bolt size. It uses NLGI #2 equivalent lubricant, is made from 52100 steel, and measures 6 1/8 in length. The system of measurement is inch.
Where to buy the TIMKEN YCJT 1-3/8 SGT bearing worldwide?
3G Electric supplies the TIMKEN YCJT 1-3/8 SGT flange bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this TIMKEN general purpose bearing.
How to install a TIMKEN 2 Bolt Flange Bearing?
To install, first clean the shaft and bore, then slide the bearing onto the shaft. Tighten the set screws evenly against the shaft using a hex key. Mount the flange to a flat surface using 1/2 in bolts, ensuring alignment. Apply NLGI #2 grease per TIMKEN recommendations for optimal performance.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
