TIMKEN YCJT 1-1/8 SGT General Purpose Flange-Mount Ball Bearing
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/8 in cylindrical bore, housed in a cast iron, not-split flange mount. It features set screws for shaft mounting, uses NLGI 2 Lithium…
SKU 3G-OTH-121425
Also listed as: YCJT118SGT · YCJT 1 1 8 SGT · YCJT-1-1-8-SGT
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/8 in cylindrical bore, housed in a cast iron, not-split flange mount. It features set screws for shaft mounting, uses NLGI 2 Lithium Complex Grease lubrication, and requires a 1/2 in mounting bolt. This inch-system unit is identified by manufacturer part number YCJT 1-1/8 SGT.
Frequently Asked Questions
What is the TIMKEN Flange Mount Bearing YCJT 1-1/8 SGT used for?
This general purpose flange-mount bearing supports rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set-screw locking suit moderate loads and speeds in dry or lightly lubricated environments.
What are the specifications of the TIMKEN YCJT 1-1/8 SGT bearing?
It has a 1 1/8 in cylindrical bore, cast iron not-split housing, set-screw shaft locking, and NLGI 2 Lithium Complex Grease lubrication. Mounting bolt size is 1/2 in, overall length is 5 9/16 in, and it uses inch-system measurements. Manufacturer part number is YCJT 1-1/8 SGT.
Where to buy TIMKEN YCJT 1-1/8 SGT flange mount bearing worldwide?
3G Electric supplies the TIMKEN YCJT 1-1/8 SGT flange mount bearing worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this inch-system radial ball bearing globally.
How to install a TIMKEN set-screw flange mount bearing?
Align the housing squarely against the mounting surface and tighten bolts to the recommended torque for 1/2 in fasteners. Slide the bearing onto the shaft, then tighten the set screws evenly against the shaft. Apply moderate grease per NLGI 2 specifications and rotate manually to check for binding.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
