TIMKEN 4 Bolt Flange Bearing: Radial Ball, 15/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 15/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent…
SKU 3G-OTH-119573
Also listed as: YCJ1516SGT · YCJ 15 16 SGT · YCJ-15-16-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 15/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent lubricant. The bearing has a 3/8 in mounting bolt size and a length of 3 47/64 in, with the manufacturer part number YCJ 15/16 SGT.
Frequently Asked Questions
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw mounting provide reliable shaft alignment and load support in moderate-duty applications.
What are the specifications of the TIMKEN YCJ 15/16 SGT flange bearing?
The TIMKEN YCJ 15/16 SGT is a 4 bolt flange bearing with a 15/16 in cylindrical bore, cast iron housing, and set screws for shaft mounting. It uses NLGI #2 equivalent lubricant, has a 3/8 in mounting bolt size, and measures 3 47/64 in length. The system of measurement is inch.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the TIMKEN YCJ 15/16 SGT or other models.
How to install a TIMKEN 4 bolt flange bearing with set screws?
To install a TIMKEN 4 bolt flange bearing, first clean the shaft and bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 3/8 in bolts. Then secure the shaft by tightening the set screws evenly against the shaft. Apply NLGI #2 grease per manufacturer guidelines.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
