TIMKEN Flange Mount Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 7/16 in cylindrical bore, designed for inch-system applications. This cast-iron, not-split housing unit features set screws and uses…
SKU 3G-OTH-119818
Also listed as: YCJ1716SGT · YCJ 1 7 16 SGT · YCJ-1-7-16-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 7/16 in cylindrical bore, designed for inch-system applications. This cast-iron, not-split housing unit features set screws and uses NLGI 2 Lithium Complex Grease as lubricant, with a mounting bolt size of 1/2 in and a 4 5/8 in length square flange.
Frequently Asked Questions
What is the TIMKEN Flange Mount Bearing used for?
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and pumps. Its cast-iron housing with set screws provides secure mounting in inch-system applications, making it suitable for moderate-load, low-to-medium-speed operations.
What are the specifications of the TIMKEN Flange Mount Bearing YCJ 1-7/16 SGT?
This bearing has a 1 7/16 in cylindrical bore, a cast-iron not-split housing, and set-screw locking. It uses NLGI 2 Lithium Complex Grease, requires a 1/2 in mounting bolt, and has a 4 5/8 in square flange length. The system of measurement is inch, and the manufacturer part number is YCJ 1-7/16 SGT.
Where to buy TIMKEN Flange Mount Bearings worldwide?
You can source TIMKEN Flange Mount Bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the YCJ 1-7/16 SGT model.
How to install a TIMKEN Flange Mount Bearing with set screws?
To install, align the bearing unit on a flat surface and tighten the mounting bolts to the recommended torque for 1/2 in bolts. Secure the shaft by tightening the set screws evenly against the shaft flat. Ensure the shaft is clean and lubricated with NLGI 2 grease before operation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
