TIMKEN YAK 2-7/16 Low-Base Pillow Block Ball Bearing
The TIMKEN YAK 2-7/16 is an inch-system low-base pillow block ball bearing with a 2 7/16-inch bore, constructed from cast iron. It features set screws for shaft mounting and a 2 43/64-inch shaft height, with a…
SKU 3G-OTH-103461
Also listed as: YAK2716 · YAK 2 7 16 · YAK-2-7-16
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN YAK 2-7/16 is an inch-system low-base pillow block ball bearing with a 2 7/16-inch bore, constructed from cast iron. It features set screws for shaft mounting and a 2 43/64-inch shaft height, with a 5/8-inch mounting bolt size.
Frequently Asked Questions
What is the TIMKEN YAK 2-7/16 pillow block bearing used for?
The TIMKEN YAK 2-7/16 is a low-base pillow block ball bearing used in industrial conveyor systems, agricultural machinery, and material handling equipment. Its cast iron housing and set-screw locking provide reliable shaft support in moderate-load, low-to-medium-speed applications where inch-system components are required.
What are the specifications of the TIMKEN YAK 2-7/16 pillow block bearing?
The TIMKEN YAK 2-7/16 has a 2 7/16-inch bore, cast iron housing with set screws, a shaft height of 2 43/64 inches, and a 5/8-inch mounting bolt size. It is an inch-system low-base pillow block ball bearing, MPN YAK 2-7/16, designed for secure shaft mounting and easy alignment.
Where to buy the TIMKEN YAK 2-7/16 pillow block bearing worldwide?
3G Electric supplies the TIMKEN YAK 2-7/16 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this inch-system bearing to any country.
How to install the TIMKEN YAK 2-7/16 pillow block bearing?
To install the TIMKEN YAK 2-7/16, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the mounting holes with the base, and tighten the 5/8-inch bolts evenly. Secure the shaft by tightening the set screws against the shaft flat. Ensure the shaft height of 2 43/64 inches is maintained for proper alignment.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN low-base pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
