TIMKEN Pillow Block Bearing: 2 7/16 in Bore, Cast Iron, Set Screws, 2 43/64 in Shaft Ht
The TIMKEN Pillow Block Bearing (SKU 3G-OTH-116670) is a general purpose pillow block ball bearing with a 2 7/16 in bore, featuring a cast iron housing and set screw locking. It has a maximum speed of 2800 RPM with…
SKU 3G-OTH-116670
Also listed as: YAK2716SGT · YAK 2 7 16 SGT · YAK-2-7-16-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Pillow Block Bearing (SKU 3G-OTH-116670) is a general purpose pillow block ball bearing with a 2 7/16 in bore, featuring a cast iron housing and set screw locking. It has a maximum speed of 2800 RPM with grease lubrication, a mounting bolt size of 5/8 in, and a shaft height of 2 43/64 in. This inch-system bearing is identified by manufacturer part number YAK 2-7/16 SGT.
Frequently Asked Questions
What is the TIMKEN YAK 2-7/16 SGT pillow block bearing used for?
The TIMKEN YAK 2-7/16 SGT is a general purpose pillow block ball bearing used in industrial power transmission systems. It supports rotating shafts in conveyors, fans, and pumps, handling radial and moderate thrust loads. Its cast iron housing and set screw locking suit moderate-speed, moderate-load applications across manufacturing and material handling.
What are the specifications of the TIMKEN pillow block bearing YAK 2-7/16 SGT?
The TIMKEN pillow block bearing YAK 2-7/16 SGT has a 2 7/16 in bore, cast iron housing with set screw locking, and a shaft height of 2 43/64 in. Maximum speed is 2800 RPM with grease lubrication. Mounting bolt size is 5/8 in. It uses inch-system measurements and carries manufacturer part number YAK 2-7/16 SGT.
Where to buy TIMKEN YAK 2-7/16 SGT pillow block bearing worldwide?
3G Electric supplies the TIMKEN YAK 2-7/16 SGT pillow block bearing worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this inch-system, cast iron bearing with a 2 7/16 in bore and set screw locking.
How to install a TIMKEN set screw pillow block bearing?
To install a TIMKEN set screw pillow block bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the housing base with the mounting surface, and tighten the mounting bolts to the recommended torque. Then alternately tighten the set screws to lock the bearing onto the shaft without over-tightening.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
