TIMKEN Pillow Block Bearing: 1 3/16 in Bore, Cast Iron, Set Screws, 1 9/16 in Shaft Ht
The TIMKEN Pillow Block Bearing (SKU YAK 1-3/16 SGT, MPN YAK 1-3/16 SGT) is a general purpose pillow block ball bearing with a 1 3/16 in bore. It features a cast iron housing, set screws, a 1 9/16 in shaft height…
SKU 3G-OTH-115166
Also listed as: YAK1316SGT · YAK 1 3 16 SGT · YAK-1-3-16-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Pillow Block Bearing (SKU YAK 1-3/16 SGT, MPN YAK 1-3/16 SGT) is a general purpose pillow block ball bearing with a 1 3/16 in bore. It features a cast iron housing, set screws, a 1 9/16 in shaft height, and a shroud. This inch-system bearing has a maximum speed of 5600 RPM with grease and requires a 1/2 in mounting bolt.
Frequently Asked Questions
What is the TIMKEN YAK 1-3/16 SGT pillow block bearing used for?
The TIMKEN YAK 1-3/16 SGT is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable shaft mounting in moderate-load, low-to-medium-speed applications.
What are the specifications of the TIMKEN pillow block bearing YAK 1-3/16 SGT?
This TIMKEN bearing has a 1 3/16 in bore, 1 9/16 in shaft height, and a maximum speed of 5600 RPM with grease. It uses a 1/2 in mounting bolt, features a cast iron housing with set screws and a shroud, and follows the inch system of measurement. The MPN is YAK 1-3/16 SGT.
Where to buy TIMKEN YAK 1-3/16 SGT pillow block bearing worldwide?
3G Electric supplies the TIMKEN YAK 1-3/16 SGT pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this bearing for your application.
How to install a TIMKEN set screw pillow block bearing?
Mount the bearing on a clean, level surface using 1/2 in bolts. Align the shaft with the bore, slide the bearing onto the shaft, and tighten the set screws evenly against the shaft. Ensure the shaft rotates freely and lubricate with grease per TIMKEN recommendations before operation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
