TIMKEN SCJT 2-3/16 General Purpose Flange-Mount Ball Bearing
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 3/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent lubricant…
SKU 3G-OTH-119979
Also listed as: SCJT2316 · SCJT 2 3 16 · SCJT-2-3-16
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 3/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent lubricant, and requires a 5/8 in mounting bolt. This inch-system unit is identified by manufacturer part number SCJT 2-3/16.
Frequently Asked Questions
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN 2 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts in applications such as conveyors, fans, and material handling equipment. Its cast iron housing and set-screw locking provide reliable shaft mounting in moderate-load, general-purpose machinery.
What are the specifications of the TIMKEN SCJT 2-3/16 flange bearing?
This TIMKEN flange bearing has a 2 3/16 in cylindrical bore, cast iron housing with set screws, and an 8 1/2 in overall length. It uses NLGI #2 equivalent lubricant, requires a 5/8 in mounting bolt, and is an inch-system unit. The manufacturer part number is SCJT 2-3/16.
Where to buy TIMKEN SCJT 2-3/16 flange bearings worldwide?
You can source the TIMKEN SCJT 2-3/16 flange bearing from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this TIMKEN general purpose flange-mount ball bearing.
How to install a TIMKEN 2 Bolt Flange Bearing with set screws?
To install, align the bearing housing with the mounting surface and secure using 5/8 in bolts. Tighten the set screws evenly onto the shaft to prevent misalignment. Apply NLGI #2 grease if needed. Always follow TIMKEN's generic installation guidelines for proper fit and shaft tolerance.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
