TIMKEN Insert Bearing: GY1012KRRB SGT, 3/4 in Bore, 1 27/32 in OD, 0.55 in Outer Ring Wd
The TIMKEN GY1012KRRB SGT is a general purpose spherical insert bearing of the radial/deep groove ball type. It features a 3/4 in bore, a 1 27/32 in OD, and a 0.55 in outer ring width, with double sealed closure and…
SKU 3G-OTH-102631
Also listed as: GY1012KRRBSGT · GY1012KRRB-SGT
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN GY1012KRRB SGT is a general purpose spherical insert bearing of the radial/deep groove ball type. It features a 3/4 in bore, a 1 27/32 in OD, and a 0.55 in outer ring width, with double sealed closure and set screw locking. This inch-system bearing is identified by the industry number GY1012KRRB SGT.
Frequently Asked Questions
What is the TIMKEN GY1012KRRB SGT insert bearing used for?
The TIMKEN GY1012KRRB SGT is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN GY1012KRRB SGT bearing?
The TIMKEN GY1012KRRB SGT is an inch-system bearing with a 3/4 in bore, 1 27/32 in OD, and 0.55 in outer ring width. It is a radial/deep groove ball type with double sealed closure and set screw locking. The manufacturer part number and bearing industry number are both GY1012KRRB SGT.
Where to buy the TIMKEN GY1012KRRB SGT bearing worldwide?
3G Electric supplies the TIMKEN GY1012KRRB SGT bearing worldwide. As a global industrial equipment distributor established in 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this inch-system insert bearing.
How to install a TIMKEN GY1012KRRB SGT set screw bearing?
To install the TIMKEN GY1012KRRB SGT, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly against the shaft using a hex key. Ensure the shaft is properly aligned to avoid binding. Always follow manufacturer guidelines for torque specifications and lubrication.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
