TIMKEN Insert Bearing: GRA103RRB2, 1 1/4 in Bore, 2 7/16 in OD, 0.709 in Outer Ring Wd
The TIMKEN GRA103RRB2 is a general purpose spherical insert bearing of the radial/deep groove ball type. This inch-system bearing features a 1 1/4 in bore, a 2 7/16 in OD, and a 0.709 in outer ring width, with…
SKU 3G-OTH-100311
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN GRA103RRB2 is a general purpose spherical insert bearing of the radial/deep groove ball type. This inch-system bearing features a 1 1/4 in bore, a 2 7/16 in OD, and a 0.709 in outer ring width, with double-sealed closure and set screw locking. It is identified by bearing industry number GRA103RRB2.
Frequently Asked Questions
What is the TIMKEN GRA103RRB2 insert bearing used for?
The TIMKEN GRA103RRB2 is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN GRA103RRB2 bearing?
The TIMKEN GRA103RRB2 is an inch-system radial/deep groove ball insert bearing with a 1 1/4 in bore, 2 7/16 in OD, and 0.709 in outer ring width. It features double-sealed closure and set screw locking. The bearing industry number is GRA103RRB2, and the manufacturer part number is GRA103RRB2.
Where to buy TIMKEN GRA103RRB2 bearings worldwide?
You can source TIMKEN GRA103RRB2 bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we supply genuine TIMKEN components for industrial applications.
How to install a TIMKEN GRA103RRB2 insert bearing?
To install the TIMKEN GRA103RRB2, first clean the shaft and housing bore thoroughly. Slide the bearing onto the shaft, then tighten the set screws evenly to lock it in place. Ensure proper alignment to avoid binding. Use a torque wrench to the manufacturer's recommended specification. Always follow TIMKEN's installation guidelines for best performance.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
