TIMKEN Insert Bearing: ER35, 2 3/16 in Bore, 3 59/64 in OD, 1.188 in Outer Ring Wd
The TIMKEN Insert Bearing: ER35 is a general purpose cylindrical insert bearing of the radial/deep groove ball type. It features a 2 3/16 in bore, 3 59/64 in OD, and 1.188 in outer ring width, with double sealed…
SKU 3G-OTH-99108
Also listed as: ER 35 · ER-35
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Insert Bearing: ER35 is a general purpose cylindrical insert bearing of the radial/deep groove ball type. It features a 2 3/16 in bore, 3 59/64 in OD, and 1.188 in outer ring width, with double sealed closure and set screw locking. This inch-system bearing is identified by industry number ER35 and manufacturer part number ER35.
Frequently Asked Questions
What is the TIMKEN ER35 insert bearing used for?
The TIMKEN ER35 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER35 bearing?
The TIMKEN ER35 is an inch-system bearing with a 2 3/16 in bore, 3 59/64 in OD, and 1.188 in outer ring width. It is a radial/deep groove ball type with double sealed closure and set screw locking. The bearing industry number and manufacturer part number are both ER35.
Where to buy TIMKEN ER35 bearings worldwide?
3G Electric supplies the TIMKEN ER35 bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this inch-system insert bearing to any country.
How to install a TIMKEN ER35 insert bearing?
To install the TIMKEN ER35, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to lock the bearing in place. Ensure the shaft is aligned and the bearing is seated fully. Double sealed bearings require no additional lubrication before installation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
