TIMKEN Insert Bearing: ER27, 1 11/16 in Bore, 3 11/32 in OD, 1.094 in Outer Ring Wd
The TIMKEN ER27 is a general purpose cylindrical insert bearing of the radial/deep groove ball type. This inch-system bearing features a 1 11/16 in bore, 3 11/32 in OD, and 1.094 in outer ring width, with…
SKU 3G-OTH-99278
Also listed as: ER 27 · ER-27
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN ER27 is a general purpose cylindrical insert bearing of the radial/deep groove ball type. This inch-system bearing features a 1 11/16 in bore, 3 11/32 in OD, and 1.094 in outer ring width, with double-sealed closure and set screw locking. It is identified by bearing industry number ER27 and manufacturer part number ER27.
Frequently Asked Questions
What is the TIMKEN ER27 insert bearing used for?
The TIMKEN ER27 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER27 bearing?
The TIMKEN ER27 is an inch-system insert bearing with a 1 11/16 in bore, 3 11/32 in OD, and 1.094 in outer ring width. It is a radial/deep groove ball type with double-sealed closure and set screw locking. The bearing industry number and manufacturer part number are both ER27.
Where to buy TIMKEN ER27 bearings worldwide?
You can source TIMKEN ER27 bearings through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide reliable sourcing for this general purpose cylindrical insert bearing.
How to install a TIMKEN ER27 insert bearing?
To install the TIMKEN ER27, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to lock the bearing in place. Ensure the double seals are not damaged during mounting. Follow standard practices for radial/deep groove ball bearings to avoid misalignment.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
