TIMKEN Insert Bearing: ER24, 1 1/2 in Bore, 3 9/64 in OD, 1.094 in Outer Ring Wd
The TIMKEN ER24 is a general purpose cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 1 1/2 in, an outer diameter of 3 9/64 in, and an outer ring width of 1.094 in. It…
SKU 3G-OTH-99029
Also listed as: ER 24 · ER-24
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN ER24 is a general purpose cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 1 1/2 in, an outer diameter of 3 9/64 in, and an outer ring width of 1.094 in. It features double-sealed closure and set screw locking. This bearing is identified by the industry number ER24 and manufacturer part number ER24.
Frequently Asked Questions
What is the TIMKEN ER24 insert bearing used for?
The TIMKEN ER24 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER24 bearing?
The TIMKEN ER24 is an inch-system bearing with a 1 1/2 in bore, 3 9/64 in outer diameter, and 1.094 in outer ring width. It is a radial/deep groove ball type with double-sealed closure and set screw locking. The manufacturer part number and industry number are both ER24.
Where to buy TIMKEN ER24 bearings worldwide?
3G Electric supplies the TIMKEN ER24 bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this bearing to support your maintenance or production needs.
How to install a TIMKEN ER24 insert bearing?
To install the TIMKEN ER24, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to lock the bearing in place. Ensure the shaft is aligned to prevent binding. Always follow manufacturer guidelines for torque and lubrication.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
