TIMKEN Insert Bearing: ER19, 1 3/16 in Bore, 2 7/16 in OD, 0.875 in Outer Ring Wd
The TIMKEN Insert Bearing: ER19 is a general purpose cylindrical insert bearing with a radial/deep groove ball design. It features a 1 3/16 in bore, 2 7/16 in OD, and 0.875 in outer ring width, with double sealed…
SKU 3G-OTH-98878
Also listed as: ER 19 · ER-19
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Insert Bearing: ER19 is a general purpose cylindrical insert bearing with a radial/deep groove ball design. It features a 1 3/16 in bore, 2 7/16 in OD, and 0.875 in outer ring width, with double sealed closure and set screw locking. This inch-system bearing is identified by industry number ER19 and manufacturer part number ER19.
Frequently Asked Questions
What is the TIMKEN ER19 insert bearing used for?
The TIMKEN ER19 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while double seals protect against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER19 bearing?
The TIMKEN ER19 is an inch-system bearing with a 1 3/16 in bore, 2 7/16 in OD, and 0.875 in outer ring width. It features a radial/deep groove ball design, double sealed closure, and set screw locking. The industry number and manufacturer part number are both ER19.
Where to buy TIMKEN ER19 bearings worldwide?
3G Electric supplies TIMKEN ER19 bearings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this bearing to meet your procurement needs.
How to install a TIMKEN ER19 insert bearing?
To install the TIMKEN ER19, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to lock it in place. Ensure proper alignment to avoid binding. Always follow manufacturer guidelines for torque and lubrication to maximize bearing life.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
