TIMKEN Insert Bearing: ER18, 1 1/8 in Bore, 2 7/16 in OD, 0.875 in Outer Ring Wd
The TIMKEN ER18 is an inch-system general purpose cylindrical insert bearing, classified as a radial/deep groove ball type. It features a 1 1/8 in bore, 2 7/16 in OD, and 0.875 in outer ring width, with double-sealed…
SKU 3G-OTH-98820
Also listed as: ER 18 · ER-18
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN ER18 is an inch-system general purpose cylindrical insert bearing, classified as a radial/deep groove ball type. It features a 1 1/8 in bore, 2 7/16 in OD, and 0.875 in outer ring width, with double-sealed closure and set screw locking. This bearing is identified by the industry number ER18 and manufacturer part number ER18.
Frequently Asked Questions
What is the TIMKEN ER18 insert bearing used for?
The TIMKEN ER18 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER18 bearing?
The TIMKEN ER18 is an inch-system bearing with a 1 1/8 in bore, 2 7/16 in OD, and 0.875 in outer ring width. It is a radial/deep groove ball type with double-sealed closure and set screw locking. The manufacturer part number and bearing industry number are both ER18.
Where to buy TIMKEN ER18 bearings worldwide?
3G Electric supplies TIMKEN ER18 bearings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this bearing to support your maintenance or production needs.
How to install a TIMKEN ER18 insert bearing with set screws?
To install the TIMKEN ER18, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's recommended torque using a hex key. Ensure the shaft is properly aligned to avoid preloading the bearing. Always follow TIMKEN's installation guidelines for best performance.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
