TIMKEN ER14 General Purpose Cylindrical Insert Bearing
The TIMKEN ER14 is a general purpose cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 7/8 in, an outer diameter of 2 3/64 in, and an outer ring width of 0.75 in. It features…
SKU 3G-OTH-98566
Also listed as: ER 14 · ER-14
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN ER14 is a general purpose cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 7/8 in, an outer diameter of 2 3/64 in, and an outer ring width of 0.75 in. It features double-sealed closure and set screw locking. The bearing is identified by the industry number ER14 and manufacturer part number ER14.
Frequently Asked Questions
What is the TIMKEN ER14 insert bearing used for?
The TIMKEN ER14 is a general purpose cylindrical insert bearing used in industrial machinery such as conveyors, fans, and pumps. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in harsh environments.
What are the specifications of the TIMKEN ER14 bearing?
The TIMKEN ER14 has a 7/8 in bore, 2 3/64 in outer diameter, and 0.75 in outer ring width. It is a radial/deep groove ball insert bearing with double-sealed closure and set screw locking. The system of measurement is inch, and the industry number is ER14.
Where to buy TIMKEN ER14 bearings worldwide?
3G Electric supplies the TIMKEN ER14 bearing to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine TIMKEN components and provide reliable support for your procurement needs.
How to install a TIMKEN ER14 insert bearing with set screws?
To install the TIMKEN ER14, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's recommended torque using a hex key. Ensure the shaft is properly aligned and the bearing rotates freely before securing the housing.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.