TE-CO Ball Plunger: Slotted, 18-8 SS Body w/ 400 SS Ball, M20x2.5 Thread, W/O Thread-Locker
The TE-CO Ball Plunger: Slotted (MPN 69117X01) is a slotted-drive ball plunger with an 18-8 stainless steel body and a 400 series stainless steel ball, featuring an M20x2.5 thread and supplied without thread-locker…
SKU 3G-OTH-180040
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TE-CO Ball Plunger: Slotted (MPN 69117X01) is a slotted-drive ball plunger with an 18-8 stainless steel body and a 400 series stainless steel ball, featuring an M20x2.5 thread and supplied without thread-locker in a 5-pack. This industrial component is sourced and supported by 3G Electric, a global solutions provider with specialist depth in combustion, pumps, and controls, across 14 industrial departments.
Frequently Asked Questions
What is a TE-CO ball plunger used for?
A TE-CO ball plunger is used for positioning, detent, and indexing applications in industrial fixtures and tooling. The spring-loaded ball provides temporary holding force, allowing quick part location and release in jigs, dies, and assembly equipment.
What are the specifications of the TE-CO ball plunger 69117X01?
The TE-CO ball plunger 69117X01 has an 18-8 stainless steel body with a 400 series stainless steel ball, M20x2.5 thread, slotted drive, and no thread-locker. It is sold in a pack of 5. The body and ball materials offer corrosion resistance for industrial environments.
Where to buy TE-CO ball plungers worldwide?
You can source TE-CO ball plungers worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the 69117X01 or other TE-CO part numbers.
How to install a TE-CO slotted ball plunger?
Install the TE-CO ball plunger by threading it into a tapped hole with M20x2.5 threads. Use a slotted screwdriver to turn the drive until the plunger is flush or at the desired depth. Avoid over-tightening to prevent damage to the spring mechanism. No thread-locker is applied, so consider adding a medium-strength thread-locker if vibration is present.
Used in
Common applications for TE-COTE-CO Products
3G Electric supplies TE-CO slotted-drive ball plungers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
