SEALMASTER Insert Bearing: ER-10, 5/8 in Bore, 1 27/32 in OD, 0.625 in Outer Ring Wd
The SEALMASTER ER-10 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, featuring a double-sealed closure. It has a 5/8 in bore, 1 27/32 in OD, and 0.625 in outer ring width, secured…
SKU 3G-OTH-98292
Also listed as: ER10 · ER 10
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-10 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, featuring a double-sealed closure. It has a 5/8 in bore, 1 27/32 in OD, and 0.625 in outer ring width, secured with set screws. This inch-system bearing is identified by industry number ER-10.
Frequently Asked Questions
What is the SEALMASTER ER-10 insert bearing used for?
The SEALMASTER ER-10 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its double-sealed radial/deep groove ball design handles moderate radial and axial loads in conveyors, fans, and agricultural machinery where shaft misalignment is minimal.
What are the specifications of the SEALMASTER ER-10 bearing?
The SEALMASTER ER-10 is an inch-system insert bearing with a 5/8 in bore, 1 27/32 in OD, and 0.625 in outer ring width. It is a radial/deep groove ball type with double-sealed closure and set-screw locking. The bearing industry number is ER-10, and the manufacturer part number is ER-10.
Where to buy the SEALMASTER ER-10 bearing worldwide?
3G Electric supplies the SEALMASTER ER-10 insert bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this bearing to any country.
How to install the SEALMASTER ER-10 insert bearing?
To install the SEALMASTER ER-10, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the set screws with the shaft flats, and tighten the set screws evenly to the manufacturer's torque specification. Ensure the retaining ring is fully seated in the housing groove before operation.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
