SEALMASTER Insert Bearing: 3-015, 15/16 in Bore, 2 7/16 in OD, 0.875 in Outer Ring Wd
The SEALMASTER Insert Bearing 3-015 is a general purpose spherical insert bearing of the radial/deep groove ball type. It features a 15/16 inch bore, 2 7/16 inch outer diameter, and 0.875 inch outer ring width, with…
SKU 3G-OTH-101989
Also listed as: 3015 · 3 015
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER Insert Bearing 3-015 is a general purpose spherical insert bearing of the radial/deep groove ball type. It features a 15/16 inch bore, 2 7/16 inch outer diameter, and 0.875 inch outer ring width, with double sealed closure and set screw locking. This inch-system bearing is identified by manufacturer part number 3-015 and bearing industry number 3-015.
Frequently Asked Questions
What is the SEALMASTER Insert Bearing 3-015 used for?
The SEALMASTER Insert Bearing 3-015 is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the SEALMASTER Insert Bearing 3-015?
The SEALMASTER Insert Bearing 3-015 has a 15/16 inch bore, 2 7/16 inch outer diameter, and 0.875 inch outer ring width. It is a radial/deep groove ball type with double sealed closure and set screw locking. This inch-system bearing carries manufacturer part number 3-015 and bearing industry number 3-015.
Where to buy the SEALMASTER Insert Bearing 3-015 worldwide?
You can source the SEALMASTER Insert Bearing 3-015 through 3G Electric, a global industrial equipment distributor established in 1990. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this bearing.
How to install the SEALMASTER Insert Bearing 3-015?
To install the SEALMASTER Insert Bearing 3-015, first ensure the shaft is clean and within tolerance. Slide the bearing onto the shaft, then tighten the set screws evenly to lock the bearing in place. Avoid over-tightening to prevent distortion. Always follow the manufacturer's installation guidelines for optimal performance.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
