REED INSTRUMENTS Replacement Probe: Repl Probe, TM-8811, Ultrasonic Thick Gauge, 5 MHz Freq
The REED INSTRUMENTS Replacement Probe (SKU TM-8811PROBE, MPN TM-8811PROBE) is a 5 MHz frequency ultrasonic thickness gauge probe designed for use with the REED TM-8811 gauge. It measures steel thickness from 0.05 in…
SKU 3G-OTH-179725
Also listed as: TM8811PROBE · TM 8811PROBE
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The REED INSTRUMENTS Replacement Probe (SKU TM-8811PROBE, MPN TM-8811PROBE) is a 5 MHz frequency ultrasonic thickness gauge probe designed for use with the REED TM-8811 gauge. It measures steel thickness from 0.05 in to 7.9 in.
Frequently Asked Questions
What is the REED INSTRUMENTS TM-8811PROBE replacement probe used for?
The REED INSTRUMENTS TM-8811PROBE is a 5 MHz ultrasonic thickness gauge probe used to measure steel thickness from 0.05 in to 7.9 in. It is designed as a direct replacement for the REED TM-8811 gauge, commonly applied in non-destructive testing of pipes, tanks, and structural steel in industrial maintenance.
What are the specifications of the REED TM-8811PROBE replacement probe?
The REED TM-8811PROBE operates at 5 MHz frequency and measures steel thickness from 0.05 in minimum to 7.9 in maximum. It is compatible with the REED TM-8811 ultrasonic thickness gauge and includes the probe only. The probe length is 7.9 in. It is manufactured by REED INSTRUMENTS under MPN TM-8811PROBE.
Where to buy the REED TM-8811PROBE replacement probe worldwide?
3G Electric supplies the REED TM-8811PROBE replacement probe worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this REED INSTRUMENTS probe to any country.
How to install the REED TM-8811PROBE replacement probe on a TM-8811 gauge?
To install the REED TM-8811PROBE, disconnect the gauge from power, remove the old probe by unscrewing the connector, and attach the new probe by hand-tightening the coaxial connector. Apply a thin layer of ultrasonic couplant to the probe face before taking measurements. Calibrate the TM-8811 gauge per the REED manual for accurate steel thickness readings.
Used in
Common applications for REED INSTRUMENTSREED INSTRUMENTS Products
3G Electric supplies REED INSTRUMENTS replacement probes. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
