We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
RAYMOND JIS Series Die Spring - Die Springs
RAYMONDDie Springs

RAYMOND JIS Series Die Spring

RAYMOND Die Spring, Series JIS, in alloy steel with a cylindrical shape, closed and ground ends. Each pack contains 5 springs, each 3 5/32 inches long (MPN ASL027080).

SKU 3G-OTH-745818

Also listed as: ASL 027080 · ASL-027080

Brand
RAYMOND
Item
JIS Series Die Spring
Part Number
ASL027080
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Delivery
Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
ASL027080
Series
JIS
Type
Cylindrical Shape, Closed, Ground End, 5 PK
Material
Alloy Steel; Silicon Wire
Lng
3 5/32 in
Finish
Chromium
UNSPSC
31161905
End Type
Closed, Ground
Standards
ASTM A877
Free Length
3-5/32 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
174.7 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Spring Shape
Cylindrical
Die Spring Color
Blue Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
1.06 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
China (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

RAYMOND Die Spring, Series JIS, in alloy steel with a cylindrical shape, closed and ground ends. Each pack contains 5 springs, each 3 5/32 inches long (MPN ASL027080).

Frequently Asked Questions

What is a RAYMOND die spring used for?

RAYMOND die springs provide controlled, high-force return in stamping dies, metal forming tools, and press fixtures. The JIS series alloy steel construction with closed, ground ends ensures stable, repeatable performance under heavy cyclic loads in industrial manufacturing environments.

What are the specifications of the RAYMOND ASL027080 die spring?

The RAYMOND ASL027080 is a JIS series die spring made of alloy steel. It has a cylindrical shape with closed, ground ends, a length of 3 5/32 inches, and is sold in a pack of 5. The manufacturer part number is ASL027080.

Where to buy RAYMOND die springs worldwide?

3G Electric supplies RAYMOND die springs worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote on the ASL027080 or other RAYMOND spring series and sizes.

How to select the correct RAYMOND die spring for a stamping die?

Select a RAYMOND die spring based on required load, deflection, and working space. The JIS series offers specific force ranges; match the spring's free length (3 5/32 inches) and diameter to your die pocket. Always consult the manufacturer's load chart for proper preload and travel limits.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

More from RAYMOND

View all RAYMOND parts →
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 1 17/64 inches in length with a 0.79-inch outer diameter. Suitable for use in stamping dies, metal forming, and tooling applications requiring controlled high-force return action under repeated compression cycles
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 1 17/64 inches in length with a 0.79-inch outer diameter. Suitable for use in stamping dies, metal forming, and tooling applications requiring controlled high-force return action under repeated compression cycles
Cylindrical die spring made of alloy steel with closed, ground ends. Measures 4 1/2 inches in length. Supplied in a 2-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action
RAYMOND
Cylindrical die spring made of alloy steel with closed, ground ends. Measures 4 1/2 inches in length. Supplied in a 2-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action
Cylindrical die spring with closed, ground ends made from silicon wire. Suitable for use in stamping and forming dies to absorb shock and maintain consistent force in high-cycle metalworking applications. Supplied as a 5-pack with a length of 1 47/64 in
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon wire. Suitable for use in stamping and forming dies to absorb shock and maintain consistent force in high-cycle metalworking applications. Supplied as a 5-pack with a length of 1 47/64 in
This JIS series die spring is made of alloy steel with a cylindrical shape and closed, ground ends. It is supplied in a 10-pack with a length of 1 49/64 inches. Die springs of this type are commonly used in stamping dies, metal forming tools, and press tooling to absorb shock and maintain consistent force under high-cycle loads
RAYMOND
This JIS series die spring is made of alloy steel with a cylindrical shape and closed, ground ends. It is supplied in a 10-pack with a length of 1 49/64 inches. Die springs of this type are commonly used in stamping dies, metal forming tools, and press tooling to absorb shock and maintain consistent force under high-cycle loads
JIS-series die spring made of alloy steel with a cylindrical shape and closed, ground ends. Measures 5 29/32 inches in length and 1.58 inches in outer diameter. Used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action in high-cycle applications
RAYMOND
JIS-series die spring made of alloy steel with a cylindrical shape and closed, ground ends. Measures 5 29/32 inches in length and 1.58 inches in outer diameter. Used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action in high-cycle applications
RAYMOND
RAYMOND
Cylindrical die spring with closed and ground ends, made from alloy steel. Suitable for stamping dies, metal forming, and tooling applications requiring controlled force and return action. Supplied in a 3-pack with a 3 1/2 in length
Cylindrical die spring made from alloy steel with closed, ground ends. Designed for use in stamping dies, metal forming, and press tooling to absorb shock and maintain consistent force in high-cycle applications
RAYMOND
Cylindrical die spring made from alloy steel with closed, ground ends. Designed for use in stamping dies, metal forming, and press tooling to absorb shock and maintain consistent force in high-cycle applications
Cylindrical die spring with closed, ground ends made from silicon wire. Series US design for consistent force in stamping dies, metal forming, and press tooling. Supplied as a 3-pack with 1 1/2 in length
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon wire. Series US design for consistent force in stamping dies, metal forming, and press tooling. Supplied as a 3-pack with 1 1/2 in length

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first