Goods are offered EXW Singapore — collection from our Singapore facility.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
RAYMOND Die Spring - Die Springs
RAYMONDDie Springs

RAYMOND Die Spring

The RAYMOND Die Spring (MPN ASF050150) is a JIS-series, cylindrical-shape spring with closed, ground ends, made from silicon wire. It measures 5 29/32 in in length with a 1.97 in outer diameter. 3G Electric sources…

SKU 3G-OTH-746009

Also listed as: ASF 050150 · ASF-050150

Brand
RAYMOND
Item
Die Spring
Part Number
ASF050150
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
ASF050150
Series
JIS
Type
Cylindrical Shape, Closed, Ground End
Material
Alloy Steel; Silicon Wire
Lng
5 29/32 in
O.D
1.97 in
Finish
Chromium
UNSPSC
31161905
End Type
Closed, Ground
Standards
ASTM A877
Free Length
5-29/32 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
149.6 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Spring Shape
Cylindrical
Die Spring Color
Yellow Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
1.97 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
China (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The RAYMOND Die Spring (MPN ASF050150) is a JIS-series, cylindrical-shape spring with closed, ground ends, made from silicon wire. It measures 5 29/32 in in length with a 1.97 in outer diameter. 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in combustion, pumps, and controls to ensure accurate fulfillment.

Frequently Asked Questions

What is the RAYMOND Die Spring ASF050150 used for?

The RAYMOND Die Spring ASF050150 is used in stamping dies, metal forming, and tooling applications where high load capacity and fatigue life are required. Its JIS-series silicon wire construction with closed, ground ends ensures consistent performance in industrial press operations.

What are the specifications of the RAYMOND Die Spring ASF050150?

The RAYMOND Die Spring ASF050150 is a JIS-series cylindrical spring made from silicon wire. It has closed, ground ends, a length of 5 29/32 in, and an outer diameter of 1.97 in. The manufacturer part number is ASF050150.

Where to buy RAYMOND Die Spring ASF050150 worldwide?

3G Electric supplies the RAYMOND Die Spring ASF050150 worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this genuine RAYMOND component.

How to select the correct RAYMOND die spring for a stamping die?

Select a RAYMOND die spring by matching the required load, deflection, and working space. The ASF050150 is a JIS-series spring with a 1.97 in O.D. and 5 29/32 in length. Ensure the spring's free length and outer diameter fit your die pocket, and verify the silicon wire material suits your operating temperature.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

More from RAYMOND

View all RAYMOND parts →
JIS-series cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 2 23/64 inches in length. Supplied in a 5-pack. Used in stamping dies, metal forming tools, and industrial presses for shock absorption and component return
RAYMOND
JIS-series cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 2 23/64 inches in length. Supplied in a 5-pack. Used in stamping dies, metal forming tools, and industrial presses for shock absorption and component return
Cylindrical die spring made of alloy steel with closed, ground ends for stable seating and consistent load distribution. Suitable for use in stamping dies, metal-forming tools, and industrial presses. JIS series, 25/32 in length, supplied in a pack of 10
RAYMOND
Cylindrical die spring made of alloy steel with closed, ground ends for stable seating and consistent load distribution. Suitable for use in stamping dies, metal-forming tools, and industrial presses. JIS series, 25/32 in length, supplied in a pack of 10
This JIS-series die spring is made of alloy steel with a cylindrical shape and closed, ground ends. Each spring measures 1 37/64 inches in length. Supplied in a 10-pack, it is suited for use in stamping dies, metal-forming tools, and press fixtures where controlled high-force return is required
RAYMOND
This JIS-series die spring is made of alloy steel with a cylindrical shape and closed, ground ends. Each spring measures 1 37/64 inches in length. Supplied in a 10-pack, it is suited for use in stamping dies, metal-forming tools, and press fixtures where controlled high-force return is required
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 5-1/2 inches in length and 2 inches in outer diameter. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action
RAYMOND
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 5-1/2 inches in length and 2 inches in outer diameter. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action
This RAYMOND die spring is an ISO-D series cylindrical spring made of alloy steel with closed and ground ends. It measures 63/64 in length and is supplied in a pack of 10. Designed for use in stamping dies, metal forming tools, and industrial presses, it provides controlled force and return action under high cyclic loads
RAYMOND
This RAYMOND die spring is an ISO-D series cylindrical spring made of alloy steel with closed and ground ends. It measures 63/64 in length and is supplied in a pack of 10. Designed for use in stamping dies, metal forming tools, and industrial presses, it provides controlled force and return action under high cyclic loads
Cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 1 inch in length with a 0.38-inch outer diameter. Supplied in a 10-pack. Used in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force
RAYMOND
Cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 1 inch in length with a 0.38-inch outer diameter. Supplied in a 10-pack. Used in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force
This die spring is a cylindrical, closed, ground-end spring made from silicon wire in the ISO-D series. It measures 7 63/64 inches in length with a 1.97-inch outer diameter. Used in stamping dies, metal forming, and tooling applications to absorb shock and maintain consistent force
RAYMOND
This die spring is a cylindrical, closed, ground-end spring made from silicon wire in the ISO-D series. It measures 7 63/64 inches in length with a 1.97-inch outer diameter. Used in stamping dies, metal forming, and tooling applications to absorb shock and maintain consistent force
JIS-series cylindrical die spring made from silicon wire. Closed and ground ends provide consistent force in stamping dies, metal forming tools, and industrial presses. Each pack contains 10 springs, each 1 3/8 inches long
RAYMOND
JIS-series cylindrical die spring made from silicon wire. Closed and ground ends provide consistent force in stamping dies, metal forming tools, and industrial presses. Each pack contains 10 springs, each 1 3/8 inches long

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first