RACO Liquid-Tight Conduit Fitting: Steel/Iron, 2 in Trade Size, Non-Insulated
The RACO 3568 is a hazardous location liquid-tight conduit fitting made of iron with a gray finish. It features a 2-inch trade size, a 45° elbow angle, and a 2-inch MNPT box connection, with an overall width and…
SKU 3G-OTH-05464
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The RACO 3568 is a hazardous location liquid-tight conduit fitting made of iron with a gray finish. It features a 2-inch trade size, a 45° elbow angle, and a 2-inch MNPT box connection, with an overall width and length of 3-1/2 inches. This insulated fitting is CSA C22.2 No. 18 Certified and rated for Class I, Division 2; Class II, Division 1 and 2; and Class III, Division 1 and 2 locations, suitable for indoor/outdoor use with flexible liquid-tight metallic conduit.
Frequently Asked Questions
What is the RACO 3G-OTH-05464 liquid-tight conduit fitting used for?
The RACO 3G-OTH-05464 is a hazardous location liquid-tight conduit fitting used to connect and route flexible metallic or non-metallic Type B conduit in Class I, Division 2; Class II, Division 1 and 2; and Class III, Division 1 and 2 environments. It is suitable for indoor/outdoor industrial applications where protection against moisture and hazardous atmospheres is required.
What are the specifications of the RACO 3G-OTH-05464 conduit fitting?
The RACO 3G-OTH-05464 is a 2-inch trade size, 45° elbow fitting made of iron with a gray finish. It has a 2-inch MNPT box connection, is insulated, and measures 3-1/2 inches in overall width and length. It is CSA C22.2 No. 18 Certified and rated for Class I, Division 2; Class II, Division 1 and 2; and Class III, Division 1 and 2 hazardous locations.
Where to buy the RACO 3G-OTH-05464 conduit fitting worldwide?
3G Electric supplies the RACO 3G-OTH-05464 conduit fitting worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this fitting to meet your project requirements.
How to install the RACO 3G-OTH-05464 liquid-tight fitting?
To install the RACO 3G-OTH-05464, first ensure the conduit end is clean and cut square. Screw the fitting's MNPT connection into the box or enclosure hand-tight, then use a wrench for final tightening. Insert the conduit into the other end and tighten the compression nut to create a liquid-tight seal. Always follow local electrical codes and the manufacturer's instructions.
Used in
Common applications for RACORACO Products
3G Electric supplies RACO hazardous location liquid-tight conduit fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
