PLASTIC SUPPLY 45 Degree Elbow: PVC, For 12 in Duct Dia, 19 1/4 in Overall Lg, 2 Pieces
The PLASTIC SUPPLY 45 Degree Elbow is a PVC elbow designed for 12-inch duct diameter, featuring a 45° angle and a 19 1/4-inch overall length. This two-piece fitting, model PVCED12, is suitable for industrial ductwork…
SKU 3G-OTH-74776
Also listed as: PVCED 12 · PVCED-12
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PLASTIC SUPPLY 45 Degree Elbow is a PVC elbow designed for 12-inch duct diameter, featuring a 45° angle and a 19 1/4-inch overall length. This two-piece fitting, model PVCED12, is suitable for industrial ductwork systems requiring a 45-degree directional change.
Frequently Asked Questions
What is the 45 Degree Elbow PVCED12 used for?
This 45 degree elbow is used in industrial ducting systems to change airflow direction by 45 degrees. It is suitable for ventilation, fume extraction, and dust collection applications where PVC piping is required. The two-piece design allows for easy assembly and maintenance.
What are the specifications of the PLASTIC SUPPLY 45 Degree Elbow PVCED12?
The PLASTIC SUPPLY PVCED12 is a 45 degree elbow made of PVC, designed for 12-inch duct diameter. It has an overall length of 19 1/4 inches and consists of two pieces. The manufacturer part number is PVCED12. This elbow is suitable for low-pressure duct systems.
Where to buy the PLASTIC SUPPLY 45 Degree Elbow PVCED12 worldwide?
You can source the PLASTIC SUPPLY PVCED12 45 degree elbow through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install a PVC 45 degree elbow in ductwork?
To install a PVC 45 degree elbow, first ensure the duct ends are clean and dry. Apply PVC primer and solvent cement to both the pipe end and the elbow socket. Insert the pipe fully, rotate slightly for even bonding, and hold for 30 seconds. Allow 24 hours for full cure before system use.
Used in
Common applications for PLASTIC SUPPLYPLASTIC SUPPLY Products
3G Electric supplies PLASTIC SUPPLY elbows. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
