PARKER DOT Air Brake Compression Fitting, 5/8 in OD x 1/2 in MNPT, 10 PK
The PARKER Compression Fitting Adapter (MPN VS68AB-10-8) is a DOT Air Brake Compression Fitting for Copper Lines, type Compression x MNPT, in a 10 PK. It has a 5/8 in OD x 1/2 in Pipe Fitting Size. 3G Electric…
SKU 3G-OTH-468094
Also listed as: VS68AB108 · VS68AB 10 8
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Adapter (MPN VS68AB-10-8) is a DOT Air Brake Compression Fitting for Copper Lines, type Compression x MNPT, in a 10 PK. It has a 5/8 in OD x 1/2 in Pipe Fitting Size. 3G Electric interprets customer demand and delivers genuine industrial equipment across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is the PARKER VS68AB-10-8 compression fitting adapter used for?
The PARKER VS68AB-10-8 is a DOT Air Brake Compression Fitting for copper lines, used to connect 5/8 in OD tubing to a 1/2 in male NPT port. It is commonly applied in heavy-duty truck and trailer air brake systems, pneumatic controls, and industrial fluid power circuits requiring a leak-proof, vibration-resistant seal.
What are the specifications of the PARKER VS68AB-10-8?
The PARKER VS68AB-10-8 is a compression x MNPT adapter with a 5/8 in OD tube size and 1/2 in pipe thread. It comes in a 10-pack (10 PK) and is designed for DOT air brake copper lines. The manufacturer part number is VS68AB-10-8, and the brand is PARKER.
Where to buy PARKER VS68AB-10-8 compression fittings worldwide?
3G Electric supplies the PARKER VS68AB-10-8 compression fitting adapter worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this genuine PARKER part for your air brake or pneumatic system needs.
How to install a PARKER compression fitting adapter on copper tubing?
Cut the copper tube square, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the PARKER fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1/4 to 1/2 turn for a leak-free seal. Do not overtighten, as copper can deform.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER dot air brake compression fittings for copper lines. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.