PARKER Hex Drive Cored Plug, 1/8 in NPT, 1000 psi, C36000 Brass, VS219P-2
The PARKER Hex Drive Cored Plug is a 1/8 in NPT threaded high-pressure pipe fitting made from C36000 brass, rated for a maximum operating pressure of 1,000 psi. With a 5/16 in length and a hex drive design, this plug…
SKU 3G-OTH-467816
Also listed as: VS219P2 · VS219P 2
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Hex Drive Cored Plug is a 1/8 in NPT threaded high-pressure pipe fitting made from C36000 brass, rated for a maximum operating pressure of 1,000 psi. With a 5/16 in length and a hex drive design, this plug is suitable for sealing ports in industrial fluid systems. 3G Electric interprets your demand for genuine industrial fittings, sourcing and supporting this PARKER component alongside thousands of others across 14 departments, with specialist expertise in combustion, pumps, and controls.
Frequently Asked Questions
What is the PARKER VS219P-2 hex drive cored plug used for?
The PARKER VS219P-2 hex drive cored plug seals threaded ports in industrial fluid systems. Its 1/8 in NPT threads and C36000 brass construction handle pressures up to 1,000 psi, making it suitable for hydraulic and pneumatic applications where a reliable, leak-proof seal is required.
What are the specifications of the PARKER VS219P-2 plug?
The PARKER VS219P-2 is a 1/8 in NPT threaded cored plug with a hex drive, 5/16 in length, and a maximum operating pressure of 1,000 psi. It is made from C36000 brass and is designed for high-pressure pipe fitting applications in industrial fluid systems.
Where to buy PARKER VS219P-2 in worldwide?
3G Electric supplies the PARKER VS219P-2 hex drive cored plug to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive genuine PARKER components for your industrial fluid systems. Contact us for availability and lead time.
How to install a PARKER hex drive cored plug?
To install a PARKER hex drive cored plug, apply a compatible thread sealant to the NPT threads, then use a hex key to tighten the plug into the port until snug. Avoid over-torquing to prevent damage to the brass fitting. Always verify pressure ratings and system compatibility before installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER threaded high-pressure pipe fittings with sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
